Total Marine Engineering Service Provider

Elevate the safety of workers and first responders, and reduce downtime with the MultiRAE family of monitors that combine best-in-class gas and radiation detection capabilities with wireless connectivity and alarms. MultiRAE instruments can be configured with 20+ sensor options, including ppb and ppm, PID, NDIR, and exotics to match the monitoring needs of multiple applications. MultiRAE monitors provide protection in the most hazardous conditions.

QRAE 3 is a versatile, rugged, one- to four-sensor pumped or diffusion gas monitor that provides continuous exposure monitoring of oxygen (O2), combustibles, and toxic gases, including hydrogen sulfide (H2S), carbon monoxide (CO), sulfur dioxide (SO2) and hydrogen cyanide (HCN) for workers and responders in hazardous environments.

The QRAE 3’s wireless communications capability enables access to real-time instrument readings and alarm status (including man-down alarm) from any location for better visibility and faster response. Real-time hazard readings can also be communicated to the ProRAE Guardian Safety System and the EchoView Host Mini-Controller Closed-Loop Wireless System for safety-enhancing wireless monitoring.

Streamline your plant-wide deployment with a family of instruments that offer similar user interface, calibration and maintenance routines, and accessories for easy interoperability for users, and cost savings on training. The ToxiRAE Pro family is the industry’s first and largest family of wireless, personal single-gas monitors that can reliably and accurately monitor a full range of common toxic industrial chemicals (TICs), volatile organic compounds (VOCs), combustible gases, carbon dioxide (CO2), and Oxygen (O2). When combined with ProRAE Guardian software, safety managers can easily view data in real time on all ToxiRAE Pro instruments, anytime, anywhere.

This portable single-gas monitor is designed to keep workers safe against the threat of carbon monoxide (CO) and hydrogen sulfide (H2S). The ToxiRAE 3’s high-performance, three-electrode sensor delivers the fastest possible response time. When used with the AutoRAE Lite bump test and calibration station, it provides a low total cost of ownership (TCO) to organizations that are looking to protect workers and deliver worksite CO and H2S personal detection compliance. With its water and dust-resistant housing, and three-alarm capability, it’s a valuable tool for ensuring workers are aware of the presence of CO or H2S.

Protect workers from the threat of volatile organic compounds (VOCs) in the workplace and observe conditions remotely from a central command station with this compact, wireless monitor. The ToxiRAE Pro PID’s next-generation sensor can detect over 300 VOCs and uses a built-in on-board library of 190 correction factors to automatically read gases in equivalent units. Reliable, rugged, and intrinsically safe, the ToxiRAE Pro PID can be easily attached to workers’ uniforms, and also provides a man-down alarm. It all adds up to better visibility and faster incident response in a variety of conditions.

This multi-gas monitor provides versatile, customizable detection and monitoring of up to six gases, available in both pumped and diffused air models. With more than 25 sensors to choose from — the broadest selection in its class — it can test for VOCs, combustibles, and a range of toxic threats, as well as monitor sufficient oxygen levels, making it an excellent choice for personal protection and leak detection in a range of industries and applications. The wireless connection sends threat and alarm data in real time to a central command, providing superior awareness for fast incident response. And its replaceable sensors, alarm, and battery, large screen, and automated bump testing and calibration make it easy to use and maintain.

For environments where combustible gases can pose a threat to your workers and your facility, this personal wireless monitor provides the visibility you need for fast incident response. The ToxiRAE Pro LEL features the most extensive on-board gas library in its class, plus 55 built-in correction factors for improved accuracy. The wireless connectivity delivers real-time data about proximity to the lower explosive limit (LEL) directly to a central command station. And with a built-in man-down alarm, you can be confident your workers are safe. The compact design of the ToxiRAE Pro LEL ensures it won’t interfere with work activities, while the replaceable sensor, filter, and battery make it easy to maintain.

This multi-gas monitor provides versatile, customizable detection and monitoring of up to six gases, available in both pumped and diffused air models. With more than 25 sensors to choose from — the broadest selection in its class — it can test for VOCs, combustibles, and a range of toxic threats, as well as monitor sufficient oxygen levels, making it an excellent choice for personal protection and leak detection in a range of industries and applications. The wireless connection sends threat and alarm data in real time to a central command, providing superior awareness for fast incident response. And its replaceable sensors, alarm, and battery, large screen, and automated bump testing and calibration make it easy to use and maintain.

Increase worker safety and improve incident response during compliance-related procedures and periodic testing with this rugged, easy-to-maintain device. The ToxiRAE Pro CO2 is the only wireless CO2 single gas monitor available on the market. The ToxiRAE Pro CO2 is a personal detector that keeps people aware of carbon dioxide levels and facilitates remote monitoring of those readings from a central command station. The ToxiRAE Pro CO2 includes a replaceable filter and sensor, rechargeable lithium-ion battery, and automated bump testing and calibration to make it easy to use and maintain.

Compact, reliable and easy-to-use, the ToxiRAE Pro doesn’t get in the way of workers doing their job and provides unmistakable five-way local and remote alarms if a threat is detected or a man is down. Plus, it offers the flexibility of easily swappable sensors to monitor for different gases in different situations. This personal, wireless monitor for toxic gases and oxygen keeps workers safe in the field by transmitting data to a central command in real time for continuous visibility.

This full-featured single-gas monitor is compact and light enough to clip onto a uniform or belt, which provides personal protection in a range of environments. The ToxiRAE II continuously displays gas concentration, short-term exposure limit (STEL), time-weighted average (TWA), and peak values for one of more than 10 toxic gases, or users can elect to measure for sufficient oxygen. With an intuitive, one-button interface and pre-set alarms that can be modified for specialized requirements, the unit is easy to use and maintain. And with a three-alarm system, the ToxiRAE II makes sure the wearer doesn’t miss the signal.

This lightweight, wearable monitor measures personal vital statistics such as heart rate, body temperature, breathing rate, and posture. The BioHarness attaches around the chest, is easy to put on and set up, and doesn’t hinder movement. When connected to a RAELink3 portable wireless transmitter and the centralized ProRAE Guardian software, the BioHarness provides real-time location information and wireless awareness of the health status of responders and workers. This proactive measurement can help you manage worker safety, prevent heat stress injuries, and make decisions about overwork/stress levels, ambient temperature, and other factors. Combined with other detectors, it helps to provide a complete picture of the safety of your people.

Elevate the safety of workers and first responders, and reduce downtime with the MultiRAE family of monitors that combine best-in-class gas and radiation detection capabilities with wireless connectivity and alarms. MultiRAE instruments can be configured with 20+ sensor options, including ppb and ppm, PID, NDIR, and exotics to match the monitoring needs of multiple applications. MultiRAE monitors provide protection in the most hazardous conditions.

Whether for industrial hygiene, leak detection, or HazMat response, the MiniRAE 3000 + delivers one of the most advanced VOC monitoring capabilities on the market. With a photoionization detector (PID) that has an extended detection range from 0-15,000 ppm, a rapid three-second response time, built-in correction factors for more than 200 compounds, patented auto-cleaning sensor technology and Reflex PID Technology™, the MiniRAE 3000 + can measure one of the highest levels of ionizable chemicals available on the market.

MiniRAE 3000 + is solution oriented through multiple connected options. A dedicated mobile APP has been developed for Remediation engineers and Industrial Hygienists. Instrument is also available with real time connectivity which can relay readings and alarm status up to 2 miles to a RAELink 3 wireless transmitter.

The UltraRAE 3000+ is one of the most advanced compound-specific monitor on the market and one of the few monitors that deliver accurate measurement of benzene from 10 ppb to 200 ppm and other VOCs up to 10,000 ppm. A 60-second response for a benzene measurement snapshot and a unique 15-minute benzene STEL measurement provide excellent versatility for entry pre-screening, marine spill response, and refinery down-stream monitoring.

UltraRAE 3000 + is solution oriented through multiple connected options. A dedicated mobile APP has been developed for Safety managers and Industrial Hygienists. Instrument is also available with real time connectivity which can relay readings and alarm status up to 2 miles to a RAELink 3 wireless transmitter.

The ppbRAE 3000+ is a best-of-breed monitor trusted by many of the world’s leaders in CBRNE, HazMat Response, Civil Defense, Oil & Gas, and other hazardous environments. Using a 3rd generation photoionization detector (PID) and built-in correction factors for more than 200 compounds, the ppbRAE 3000+ is one of the most advanced VOC monitors for parts-per-billion (ppb) detection. It measures the presence of VOCs from 1ppb-10,000ppm with a three-second response time. Optional built-in Mesh Radio enables real-time monitoring of instrument readings wirelessly. Another option is Bluetooth, which can relay readings and alarm status up to 2 miles to a RAELink 3 wireless transmitter. And a rugged housing, large display, and large keys that can be operated with three layers of gloves all make for a unit that’s easy to use and maintain.

ppbRAE 3000 + is solution oriented through multiple connected options. A dedicated mobile APP has been developed for survey applications. Instrument is also available with real time connectivity which can relay readings and alarm status up to 2 miles to a RAELink 3 wireless transmitter.

MultiRAE is the most advanced portable chemical detector on the market. With the flexibility of up to six gas sensors and the convenience of wireless portability, this multi-gas monitor is versatile and customizable, while delivering real-time access to instrument readings and alarm status from any location. Choose from 25 sensor options including LEL, PID, NDIR, and exotics that can be easily changed in the field. With five built-in alarms, including man down, and wireless connectivity to your command center, MultiRAE delivers vital information for fast incident response.

This industry-leading wireless device monitors both chemical threats and gamma radiation and is the only multi-threat monitor with parts per billion precision. With the ability to wirelessly transmit threat and alarm data in real time to a central command station, the MultiRAE Pro offers improved visibility and awareness. It also gives you the flexibility to swap out 25 different sensors for a range of threats, including VOCs, toxic gases, combustibles, oxygen levels, as well as gamma radiation detection. The large display and replaceable sensors, pump, and battery make it easy to use and maintain, while five different alarms, including man down, provide the versatility you need to respond appropriately and quickly to incidents.

This affordable hand-held monitor for VOCs provides superior reliability for leak detection and environmental cleanup and remediation. With a photoionization detector that measures from 0-5,000 ppm, a built-in flashlight, and a rugged housing designed for harsh environments, it’s perfect for a range of applications and approved for safe area use in North America. The pump draws samples from up to 100 feet away, and with a 3-second response time, the MiniRAE Lite + can detect a leak before it can cause harm. This device supports more than 10 languages, and includes a large display and large keys that can be operated with up to three layers of gloves.

Perform quick, on-the-spot measurement of specific toxic and combustible substances with this traditional, low-cost solution. The hand pump features a spring-less piston to accurately draw 50 and 100cc samples. The single-use colorimetric gas detection tubes change color in direct correlation to the concentration of gas present. No calibration is required, and the ergonomic pump can be used even with multiple layers of gloves.

This multi-gas monitor provides versatile, customizable detection and monitoring of up to six gases, available in both pumped and diffused air models. With more than 25 sensors to choose from — the broadest selection in its class — it can test for VOCs, combustibles, and a range of toxic threats, as well as monitor sufficient oxygen levels, making it an excellent choice for personal protection and leak detection in a range of industries and applications. The wireless connection sends threat and alarm data in real time to a central command, providing superior awareness for fast incident response. And its replaceable sensors, alarm, and battery, large screen, and automated bump testing and calibration make it easy to use and maintain.

This multi-gas monitor provides versatile, customizable detection and monitoring of up to six gases, available in both pumped and diffused air models. With more than 25 sensors to choose from — the broadest selection in its class — it can test for VOCs, combustibles, and a range of toxic threats, as well as monitor sufficient oxygen levels, making it an excellent choice for personal protection and leak detection in a range of industries and applications. The wireless connection sends threat and alarm data in real time to a central command, providing superior awareness for fast incident response. And its replaceable sensors, alarm, and battery, large screen, and automated bump testing and calibration make it easy to use and maintain.

The AreaRAE Plus provides superior detection of toxic and combustible gases, VOCs and wind speed, direction and humidity—all in one easy-to configure device. Plus, you’ll have vital details about threats happening in real-time—arming you with the information you need to act quickly.

Assess and respond quickly to the release of toxic and radioactive substances with this turnkey system. The AreaRAE Rapid Deployment Kit (RDK) includes four versatile GPS-enabled AreaRAE monitors, RAEMet (AreaRAE Pro RDK only), a RAELink3 wireless router built in and all the necessary accessories for field operation. With The RDK, you have everything you need to create a perimeter and set up a command station up to two miles from the site. It all fits into a military-grade protective case, which charges all the batteries during storage.

The FA300 Alarm Bar is part of the MeshGuard system for hazardous gas detection. The alarm device comes with one audible and four visual alarm outputs, and the alarm logic is fully configurable from the FMC 2000 multi-channel controller.

Deploy a fixed MeshGuard wireless gas-monitoring network quickly with this complete, turnkey solution. The MeshGuard RDK includes a controller and your choice of a combination of toxic and combustibles gas monitors. This kit provides a complete self-forming, self-healing gas detection network system. Certified for Class I, Division 1 environments, the MeshGuard RDK comes in a ruggedized, water-tight case on wheels.

Continuously monitor for the threat of Volatile Organic Compounds (VOCs) in hazardous locations with the fixed RAEGuard 2 PID detector. This monitor is easy to configure and maintain in the field thanks to a modular design with easy access to PID lamp and sensor, without the need for tools. The internal diaphragm pump speeds sample flow-throw and the unit delivers highly accurate readings with both digital and analog outputs. Low, high, and fault relays can be configured to trigger alarms or integrate with your process controls for automatic shutdown in response to VOC threats. A magnetic key interface enables the detector to be calibrated and operational parameters adjusted with the explosion-proof enclosure in place.

The Touchpoint™ Plus Wireless is a hybrid multi-channel controller with a built-in wireless modem that is designed for integration with RAE Systems by Honeywell MeshGuard intelligent network of connected sensors combined with traditional hard wired sensors. It is the command-and-control element of the wireless gas detection system that gathers data, monitors and activate alarms from MeshGuard toxic, flammable gas and flame detection monitors.

Remotely monitor toxic gases using the most advanced gas detection technology and connected data systems. The wirelessly connected mesh-radio based MeshGuard Stainless Steel is a core component of the MeshGuard network of connected sensors. MeshGuard Stainless Steel is rugged, reliable, and designed for rapid deployment. It runs for up to six months on a single battery and provides continuous detection and measurement of potential threats even in hazardous work environments such as oil and gas rigs, industrial sites, and refineries. The MeshGuard Stainless Steel intelligently finds the best available path to establish a self-forming, self-healing wireless network and delivers all sensor and alarm data to the RAE Systems controller of your choice. The device also displays the information on the large, back-lit LCD screen and has integrated audible and visual alarms. The MeshGuard Stainless Steel is intrinsically safe, IP-65 rated weather resistant, and certified for the most hazardous, Class 1, Division 1 or Zone environments.

Turn any laptop or desktop PC into a wireless controller for MeshGuard or portable monitors. Using either an RS 232 serial or Ethernet port, the Radiant Reader transmits wireless sensor data to a PC running ProRAE Guardian software. Designed for outdoor use in non-hazardous environments.

The ProRAE Guardian System wirelessly delivers real-time personal and point threat-detection data on toxic gases and radiation, worker/responders’ location and physiological condition. It provides situational awareness, tracks and identifies toxic chemicals, radiation, and plumes, and enables faster data-driven decision making to protect workers and the public and reduces incident response times.

ProRAE Guardian integrates instrument data and alarm status from up to 512 RAE Systems toxic gas and radiation monitors and select third-party devices on a single dynamic map, and allows the information to be shared by multiple plant managers or responder teams through a secure Internet connection. The real-time data can be viewed remotely on a PC, smartphone or tablet.

The RAELink3 wireless transmitter enables a central ProRAE Guardian base station to view sensor and alarm data from RAE Systems portable monitors and select third-party devices for improved situational awareness and faster incident response. The RAELink3 also provides GPS data, which enables the command center to stay aware of the location of personnel and monitors. The unit can be programmed to function as a host or remote router, as well as a signal repeater, giving you versatility and flexibility in your infrastructure.

This versatile, fixed-head wireless device can play a variety of roles in an advanced wireless infrastructure. RAEPoint can serve as a stand-alone, DC-powered, explosion-proof wireless router for a mesh network. As a remote relay, it can be configured to extend the range of the network and increase redundancy as an additional node. Separate versions are compatible with either fixed MeshGuard detectors or wireless portable detectors such as the MultiRAE and ToxiRAE Pro. Certified for Class I, Division 1 hazardous environments, and with an optional alarm bar with two xenon strobes and a 110-decibel horn, RAEPoint can provide fast, always-on access to vital monitor data.

GPS-enabled portable router for wireless transmission of sensor and alarm data. The RAELink3 Mesh contains two radios, one short-range for connection with portable monitors within 30 feet, and a long-range radio for transmission up to 2 miles away to a command center running ProRAE Guardian software.

Rugged, easy to operate, and with an intuitive interface, the RAELink3 Mesh can receive data from up to eight monitors wirelessly and an additional through a cable connection. The device can also interface with select third-party devices such as CWA detectors and particulate monitors and is easily configured and deployed in the field.

This mini-controller functions as the center for a mobile wireless network of RAE Systems portable gas monitors to increase awareness, improve decision-making, and speed up incident response. The EchoView Host can receive communications from up to eight monitors and display their call names, readings, and alarm status in real time on an easy-to-read screen. With a communication range extendable to over one kilometer using Mesh Routers, the EchoView Host gives safety officers remote access to gas concentration data directly from the hot zone. Water-proof, dust-tight, and intrinsically safe for Class I, Division 1 hazardous environments, it’s a rugged device that can run up to 10 days on a single battery.

Rapidly deploy a mobile command center to monitor toxic gas and radiation even in hazardous conditions with this military-grade, turnkey wireless host controller. With ProRAE Guardian software pre-installed, a built-in RAELink wireless router, a rugged magnesium case, and a resistive touch-screen, the RDK Ruggedized Host requires no assembly or configuration. Just open it and begin receiving data from up to 64 remote wireless monitors. The software integrates data into an intuitive, real-time map that enables fast response to chemical or toxic threats, while also logging data for post-event viewing. The results can be integrated with third-party software or pushed over the Internet for remote viewing by all decision-makers.

This versatile signal booster extends the range of your MeshGuard monitoring system to allow transmission and receipt of monitor readings and alarm statuses over a larger total area. The MeshRouter can also be used during deployment of a MeshGuard system to find the optimal locations for monitors, since it displays the wireless signal strength of connected monitors. Up to three MeshRouters can be combined to extend the communication range between monitors and the EchoView Host from 330 feet (100 meters) to up to .6 miles (1 kilometer). The rugged housing makes it effective for Class I, Division 1 hazardous environments. The unit can operate for 10 or more days with the internal battery and 45 or more days with an external PowerPak for continuous reliability.

RDK Host is a turn-key controller for AreaRAE systems. The laptop is preloaded with ProRAE Guardian software and is housed in a military-grade portable case with RAELink modem and antenna. All of the components can be charged inside the case. All assembly and configuration is already done, so simply power on the controller to view real-time data from up to 64 remote monitors. It also includes option for GPS.

Set up a command center for environmental threats quickly and easily with this turnkey wireless host controller. The RDK Host includes ProRAE Guardian software pre-installed on a laptop PC and a RAELink 3 wireless transmitter, all housed in a ruggedized carrying case. It requires no assembly or configuration. Just open it and begin receiving data from up to 64 remote wireless monitors. The software integrates the data into an intuitive, real-time map that enables fast response to chemical or toxic threats, while also logging data for post-event viewing. The results can be integrated with third-party software or pushed over the Internet for remote viewing by all decision-makers.

Monitor your wireless MeshGuard network while away from the fixed controller with this portable device. Capable of displaying the data and alarm status for up to 16 monitors, EchoView enables you to be mobile in your environment while still staying aware of conditions. The device can run for 10 days on its internal battery, or up to 45 days with an external power pack.

The external battery charger accessory allows for the MultiRAE battery pack to be charged while it is not connected to the instrument. Up to 5 external battery chargers may be housed on the external charger holding tray.

The MultiRAE colored boot accessory enables customization of the external appearance of the MultiRAE family of portable gas detectors. The colored boots enable for visible differentiation of MultiRAEs having different configurations, ensuring that the correct instrument is selected for the task.

Simplify bump testing and calibration of your RAE Systems gas monitors with the AutoRAE 2. Versatile and modular, it can be deployed as a single, stand-alone unit to calibrate one instrument at a time, or networked to support up to 10 units at once and calibrate for up to five distinct gases. One-touch bump testing and single-button operation for calibration make it easy to use. Upgradeable firmware protects your investment and ensures that it’s always up-to-date, while the standard SD card for storage ensures your data is always at your fingertips.
download datasheet download manual

Calibrate your RAE Systems monitors effectively and efficiently and stay in compliance using our calibration tools and kits. In addition to the AutoRAE 2 and AutoRAE Lite calibration systems that deliver automatic bump testing, calibration, charging and data management, RAE systems offers a full range of accessories for automatic or manual calibration.

Stand-alone gas cylinders range in size from 11 liters to 103 liters, and convenient multi-gas mixtures enable calibration of multiple sensors at once. Calibration accessories can also be purchased as part of portable kits that include a variety of calibration gas cylinders with matching regulators and tubing, all inside a convenient carrying case, for efficient calibration in the field. Choose from a wide variety of tubing options and demand-flow and constant-flow regulators, based on your needs.

Extend the operating time of your RAE PowerPak with this solar-powered charger. With a 30-watt solar panel, the intrinsically safe SolarPak is certified for Class I, Division 1 (ATEX zone 0) hazardous environments and eliminates the need for trenching and cabling, as well as changing batteries. Simple to install and operate, it can be mounted on a pole or wall to maximize energy production. The SolarPak provides 24/7/365 continuous equipment operation in most global locations.

Test and calibrate your QRAE II or ToxiRAE 3 monitor quickly and easily with this cost-effective station. Capable of performing a bump test in only 12 seconds, and full calibration in 2 minutes, the AutoRAE Lite enables accurate, reliable monitor performance. A “no gas flow” alarm alerts you to potential problems, while the demand-flow system prevents gas leaks, for maximum safety and convenience.

For sensors to work in the field, they must be electrically stable. While some sensors, such as for carbon monoxide (CO), can be conditioned and ready in an hour, other sensors, like for ammonia (NH3), take 24 hours or longer to reach stability. When you respond to an emergency, you need all of your options immediately available. The SensorRAE 4R+ keeps up to six sensors warmed up, stored on a bias if necessary, and ready for deployment. Rugged, pocket-sized, and waterproof, the SensorRAE 4R+ is a convenient way to condition, store, and transport sensors.

Use these tubes with the UltraRAE 3000 + and previous generation models to test for specific compounds, including benzene in oil refinery processes and butadiene in polymer and rubber manufacturing. When used with RAESep tubes, the UltraRAE 3000 + photoionization detector, equipped with a 9.8eV PID lamp, can get a benzene snapshot in 60 seconds, or deliver a full STEL measurement over a 15 minute period.

Keep your MeshGuard system up and running for extended periods with this rechargeable external battery unit. Built with a rugged stainless steel housing and certified intrinsically safe for Class I, Division 1 and ATEX Zone 0 hazardous environments, it is hot-swappable in the field. The RAE PowerPak can run an LEL monitor for more than 20 days, and an electrochemical toxic gas monitor for more than 18 months.

The LP-1200 Hand Pump makes it easy to manually measure the presence of toxic and combustible gases. This hand-powered pump works seamlessly with RAE Systems colorimetric tubes. The ergonomic, durable device features a spring-less piston design and solid metal construction, and can be used even with multiple layers of gloves. A built-in counter keeps track of the number of strokes, providing a reliable way to draw 50 ml and 100 ml samples for accurate readings.

This alternative power source can provide power for wireless, remote RAE Systems monitors to eliminate the need for cabling and electricity. The SolarRAE is a fully adjustable 30-watt solar panel that generates power and stores it in a 55 Amp/hour sealed gel battery. Housed in a painted steel enclosure suitable for outdoor environments, it also features a built-in lightning arrestor to protect internal components from the elements.

Transport your monitors and gas-detection infrastructure equipment quickly and safely with these rugged or wearable transport cases. From holsters to water-proof, dust-proof, and shock-resistant carrying cases, we have a variety of accessories to help you conveniently protect and move your monitors.

For sensors to work in the field, they must be electrically stable. While some sensors, such as for carbon monoxide (CO), can be conditioned and ready in an hour, others, like those for ammonia (NH3), take 24 hours or longer to reach stability. When you deploy in an emergency, you need all of your options immediately available. This rugged, pocket-sized device keeps up to four sensors ready for installation, calibration, and use in the AreaRAE and other monitors. It also stores sensors on the bias when necessary. That means your responders have a safe, effective way to store sensors and always have a suite of sensors available when they need them.

Ensure maximum accuracy with your RAE monitors through effective and efficient calibration with our calibration gases. Stand-alone gas cylinders range in size from 11 liters to 103 liters, and convenient multi-gas mixtures enable calibration of multiple gases at once, including common mixtures such as carbon monoxide, hydrogen sulfide, and combustibles for LEL sensor calibration. Calibration gases can also be purchased as part of portable kits for calibration in the field. Choose between demand-flow and constant-flow regulators based on your needs.

Ensure accurate measurements of volatile organic chemicals (VOCs) even in wet or humid conditions with this pumped monitor attachment. The Humidity Filtering II Tube uses a solid absorbent to remove moisture from gas samples that can cause photo-ionization detector (PID) readings to drift. The drying process doesn’t impact readings of most VOCs, making it especially useful for measuring chlorinated solvents during soil and water mediation, and for measuring VOCs at often-humid landfill sites. The tube lasts for up to half an hour of continuous use.

These kits enable you to remotely sample toxic and combustible gases quickly and easily in the field using various RAE monitors. Kits include probe, tubing, and aspirator options for your specific application.

Remove impurities from the ambient air with these single-use tubes for true zero calibration of your RAE Systems gas monitors. The charcoal or filter in each tube removes potential Volatile Organic Compounds (VOCs) from the air that might throw off readings for highly sensitive monitors, such as the ppbRAE 3000 + photoionization detector or the MultiRAE Pro multi-threat monitor.