Total Marine Engineering Service Provider

The Powder Fire Extinguisher ABE, distinguished by a white coloured band around the top of the cylinder, is the most widely used type of fire extinguisher suited for fires occurring in the house, boat, garage, car or caravan. They discharge a fine powder that absorbs fuel molecules, depriving the fire of a fuel source.

Powder Fire Extinguishers are available in a range of sizes for domestic and industrial situations including 2.1kg, 2.7kg, 4.5kg and 9.0kg models. The ABE range also offers a 4.5 kg high performance fire extinguisher.

Powder Fire Extinguishers ABE are suitable for the following types of fire:

Class A – Paper, textiles, wood, most plastics & rubber

Class B – Flammable liquids

Class C – Combustible gases

Class E – Electrically energised equipment

Wet Chemical Fire Extinguishers, marked by an oatmeal coloured band, are effective against fires involving cooking oils and fats. They employ an agent that reacts with burning cooking oil or fat to form a suds-like blanket across the fuel surface, cutting off the fire’s air supply and preventing the release of flammable vapours.

Wormald offers Wet Chemical Fire Extinguishers in two sizes. The 7 litre is ideal for large cooking and food processing applications, and the 3.5 litre is ideal for restaurant kitchens.

Wet Chemical Fire Extinguishers are suitable for the following types of fires:

Class A – Paper, textiles, wood, most plastics and rubber

Class F – Cooking oils or fats

This product should not be used on electrical fires (Class E)

Water Fire Extinguishers are completely red with no coloured band. Water Fire Extinguishers discharge a stream of water onto the fire, lowering the temperature of the burning material to below ignition point.

Water options are available in a 9.1 litre size.

Water Fire Extinguishers are suitable for the following types of fires:

Class A – Paper, textiles, wood, most plastics & rubber

This extinguisher is not suitable for use on Classes B, E or F fires.

Foam fire extinguishers are marked with a blue band.Foam fire extinguishers work by covering a burning flammable liquid with a blanket of foam, cutting off the fire’s air supply and preventing the release of flammable vapours.

Foam option available - 9.1 litre spray foam size.

Foam Fire Extinguishers are suitable for the following types of fires:

Class A – Paper, textiles, wood, most plastics & rubber

Class B – Flammable liquids

This product should not be used on electrical fires (Class E)

Carbon dioxide is a non-conductive and non-corrosive gas used to reduce the amount of oxygen available to the fire. Carbon dioxide is extracted from the atmosphere and stored at high pressure in the liquid state within a fire extinguisher.

Wormald offers a range of CO2 type extinguishers including 2kg, 3.5kg and 5kg options.

Carbon Dioxide Fire Extinguishers are suitable for the following types of fires:

Class B – Flammable liquids

Class E – Electrically energised equipment

Fire Hose Reels are normally installed to comply with specific Regulatory Requirements of the New Zealand Building Code. Fire Hose Reels are located to provide a reasonably accessible and controlled supply of water to combat a potential fire risk. The length of a fully extended fire hose is normally between 18 and 36 meters. They are available in diameters of 13, 19 and 25mm (internal measurement). These appliances are designed to deliver, as a minimum, 14L of water per minute. However, some hose reels offer flows of 75L per minute. A control nozzle attached to the end of the hose enables the operator to control the direction and flow of water to the fire.

The Wormald Fire Hose Reel features:

• A solid brass hose nozzle
• Quick and easy installation using our simple wall mounting bracket

Top Loader - 65 & 75 series

Features:

• Truck and Trailer mounting
• Strong durable design
• Lightweight
• Internal tension strap helps prevent movement by the cylinder
• Flat back for ease of mounting

The Pro-Cab provides simple operation for one to seven users simultaneously and supplies clean breathable air to the wearer. It can be worn with spectacles, long hair and over full beards.

Typical installations utilise existing standard breathing apparatus cylinders of either 200 bar or 300 bar that can be stowed under the seat. The system is activated by turning on the cylinder valve for a constant flow of clean, breathable air, individually supplied to each wearer. Each Pro-Cab system is tailored to suit the individual vehicle design and application and can be simply installed on-site.

Wormald supplies a range of manual and automatic resuscitation systems for many applications, such as; rescue, mining, sporting venues and emergency services. The two central components of the system are the control module and the demand valve. It also features a range of modes, settings, alerts and a manual override to suit a range of situations.

The Vision 3 PP Facemask features Toroidal visor for improved vision. Silicone outer mask and TPE inner mask left sided quick fit connection for demand valve. Standard rubber head harness.

These facemasks are available in silicone with 5 point or net head harness standard, with Left Quick Fit (LQF) port to accept demand valve. Options for Right Electronic Quick Fit (REQF) to suit Communications, Voice Amplifier or Right DIN (RDIN) to accept the range of Scott® filters are also available.

The Promask PP Facemask offers multi-level protection. In addition to a superior fit around the surface of the face, the versatile Promask features a wider lens for an extended field of vision.

A non allergenic, clear silicone nose cup offers a feeling of openness without blocking one’s vision. Made from black halo butyl, left sided quick fit connection. These facemasks are available in halo-butyl with 5 point or net head harness standard, with Left Quick Fit (LQF) port to accept demand valve.

Options for Right Electronic Quick Fit (REQF) to suit Communications, Voice Amplifier, Right DIN (RDIN) to accept the range of Scott filters or the unique Right Drinking Port (RDP) for re-hydration purposes are also available.

The Tri-Gene mask cleaner products are aldehyde, chlorine, phenol and ethanol free and highly effective for cleaning masks for hygiene and high visibility.

They are available as disinfectant wipes in drums of 100 wipes or as a cleaning and disinfectant concentrate solution, available in 1 litre or 5 litre drums with a handy metered pump dispenser.

Safe and reliable cylinders for every applicationAs part of a comprehensive Life Safety & Rescue range of products, Wormald’s Self Contained Breathing Apparatus (SCBA) Cylinders are suitable for even the most demanding professional applications.

In an urgent, dangerous and often noisy emergency situation, one of the biggest and most critical problems fire services personnel face is adequate communications with each other – particularly whilst wearing breathing apparatus.

The Scott® communication range addresses this issue by providing an interface between the facemask and the radio that provides superb speech transmission to enable clear communications and smoother operations.

• Smallest, lightest, loudest stand alone PASS available.
• Designed to meet the standards for firefighters and Industrial worker.
• Available in 30, 60, 90 and 120 second lack of motion alarm times.
• SuperPASS II with heat is available with integrated temperature sensing. This internal sensor monitors thermal inertia exposure. When the firefighter exceeds a predetermined time weighted average temperature threshold, the audible heat alarm is activated.
• Certifications: Intrinsically safe for use in Class 1, Division 1, Groups A, B, C, & D hazardous locations (UL 913). SPII-H-Ex-A ATEX certification

• TPASS-3™ EVACUATE is a high-performance two-way radio signaling PASS device that is intrinsically safe per ANSI/UL 913, sixth edition.
• The TPASS-3™ EVACUATE system provides total accountability automatically registering each TPASS-3™ unit present by identifying the individual firefighter by name and ID number.
• Designed to meet the rigors faced by firefighters and industrial workers. Available in 30, 60, 90 and 120 second lack of motion alarm times.
• The “Auto On” feature provides the next level of assurance that PASS are not only worn, but are turned on automatically when removed from the storage position. The Accountability Storage Key is a value added benefit of Grace Industries’ TPASS-3™, providing a secondary means of personnel accountability.
• For use in Class 1, Groups A, B, C, and D; and Class II, Groups E, F, and G; Division 1 Hazardous Locations.
• The TPASS-3™ IS-R is also CSA and Industry Canada Approved.

TPASS-4™ is a high-performance two-way radio signaling PASS device that provides total accountability automatically registering each TPASS-4™ unit present by identifying the individual firefighter by name and ID number.

TPASS-4™ is the only 'Two-way signaling stand-alone PASS' that was designed and tested to meet the life safety needs of firefighters. It is third party certified Compliant to NFPA 1982, Standard on Personal Alert Safety Systems (PASS), 2007 Edition.

Smart Signal Technology is a patented proprietary high-performance, encrypted two-way radio signaling system that allows every TPASS-4™ device to repeat critical distress and evacuate signals. This provides a superior reach and penetration deep into complex building structures assuring these alarm signals are received by the Incident Commander. The accountability storage key is an added benefit. The clear identification window provides the opportunity to specifically identify the user through the ability to personalize the keys with photos, names, ID numbers, department ID, bar-codes, etc.

This model features a 32-character LCD display. The SC250 contains a high performance radio transceiver that allows signaling between other SuperCell units, Grace Command Base units and other Grace telemetry devices. Standard features include audible, visual and vibrating alert modes.

The units’ LCD can show the name, ID number or location for an emergency distress signal received. A memory database contained in the SC250 is capable of monitoring signals of up to several thousand units and also supports sending and receiving pre-programmed text messages. A panic button located on top of the unit can transmit an emergency distress signal which can be received by other SuperCells or Grace Command Base units.

The SC250 allows several individuals to be notified of alarm, evacuate, check-in, or roll call situations.

The Grace Industries Watchdog package includes; a monitor radio telemetry transceiving unit with in-command or grace-watch software package and a Panasonic Toughbook ® computer at market price.

In-Command/Grace Watch A package includes the Watchdog Monitor transceiver unit which sends and receives the radio telemetry signals displayed on the In-Command or Grace-Watch software. The system is capable of monitoring over 3,000 users. Some of its key features are the immediate notification of TPASS™ in a MAYDAY or distress situation, the ability to send EVACUATE or CALL signals to selected individuals or all personnel, the ability to perform automatic Personnel Safety Accountability (PAR) checks, and automatic ROLL CALL when conditions warrant. The Panasonic Toughbook ® computer offers touch-screen flexibility in a ruggedized computer.

Lower exhaust emissions and increased fuel economy make the VF53AS environmentally friendly. Its low-noise output means it is also easier to work around and does not drown out spoken communication. State-of-the-art 4-stroke 3-cylinder engine technology ensures maximum reliability for fighting fires in any season. Quick priming enables the pump to prime three meters in only three seconds.

This high-performance pump combines automatic priming and high capacity, making it very reliable and easy to use. Advanced oil injection and auto mixing oil delivery systems mean the engine can be trusted to start quickly and easily. Gasoline and engine oil are mixed automatically at a precise ratio to engine speed, thus saving the operator time and hassle. The engine and pump castings are made of anticorrosive aluminum-alloy to reduce weight and prolong the pump’s working life.

The VC 82ASE’s advanced features and functions are designed to enable fast and efficient fire fighting in all seasons. It has a large integrated fuel tank, which means more time can be spent fighting the fire and less time on refueling. The engine is protected from overheating by way of the cooling water recirculation system and an overheat protection sensor that stops the engine automatically when it reaches 80oC.

Quick priming (three metres in six seconds) is one of the VC 72AS’s many features. This compact and lightweight unit can be carried by two fire fighters and will fit existing locker space for this type of pump. Both the engine and pump are designed and developed specifically for fire pumps by Tohatsu, ensuring higher pump performance for its class.

A Tohatsu 2-stroke, 2-cylinder, water cooled gasoline engine enables water to be drafted to approximately 9 metres. This pump is designed with ease-of-use in mind and is equipped with an oil pump that automatically mixes gasoline and engine oil without the need for operator intervention. The engine and pump castings are made of anti-corrosive aluminium alloy, which reduces the pump’s weight and prolongs its working life. A rotary vane vacuum pump enables quick priming (three metres in six seconds).

This superior water handling system is designed to withstand the rigors of fire fighting in remote and challenging conditions. Renowned for its ability to maintain high pressure over extraordinary distances and elevation, this pump weighs just over 27 kg and can be carried by one person – a critical attribute out in the field. A quick release clamping mechanism enables damaged pump ends to be rapidly changed in situ with minimal downtime.

Pairing a reliable single stage pump end with a Honda 4-stroke 2.5 HP engine provides high volume, high pressure fire fighting capacity. This very portable, compact and lightweight powerhouse performs well when used by itself or in tandem with other pumps, and is a popular choice for entry level fire fighting. The widely-available Honda 4-stroke 2.5 HP engine makes for easy operation and engine parts sourcing.

This specialised 4-stage pump end’s performance and dependability is unmatched. It is ideal in water handling operations that require high pressure and involve long hose lays and high elevation. The 12-16 pump end can move an impressive volume of water at high pressures.

• Typically used on the WATERAX Mark-3® and BB -4 units
• The optimal pump end for type 4 and type 6 SKIDTANX/Slip-On units that demand high pressure.

This high performance 3-stage pump end is ideal for water handling operations that require high pressure and involve medium hose lays and moderate elevation. It is typically used on the WATERA X ULTRA STRIKER unit. The 18-16 pump end is also a popular choice for many SKIDTANX/ Slip-On applications when used in conjunction with the WATERA X Drive Assembly.

This lightweight compact 2-stage pump end, typically used on the WATERAX STRIKER II-PLUS, is most effective for water handling operations that require high pressure and involve shorter hose lays and low to flat elevation conditions. Used in conjunction with the WATERAX Drive Assembly, the 25-16 pump end is another popular choice for many SKIDTANX/Slip-On applications.

The WATERAX B-2X pump end is optimal for moving large volumes of water, thus reducing overall inventory requirements, carrying weight capacity, and pump downtime in the field. It can be instantly coupled to the Mark-3® engine or the BB -4 engine with the same coupling system.

• Aluminum alloy pump components and anodized parts for lighter weight and greater resistance to corrosion
• Compatible with WATERAX Belt drive system for reliable, low maintenance performance
• Quick release clamp and swappable pump ends for ease of maintenance and minimal equipment downtime

The Wormald Domestic Fire Fighting pump is designed for around the home, perfect for tackling small fires and protecting residential and rural properties during scrub fires.

The Wormald Domestic Fire Fighting pump is a portable, easy to use, fire fighting package able to pump water from swimming pools, tank supply or any other water source. Designed to be set up and used by one person if required. Set-up is simple and quick. Connect the suction hose to the pump outlet, start the motor, run out the delivery hose and aim the nozzle at the fire.

The Razor LED is an intrinsically safe torch with advanced LED technology. It uses 3 AA alkaline batteries and has an impressive lamp life of 30,000 hours. The knurled design allows for maximum grip and total control.

Responder right angle LED torches are intrinsically safe with an interchangeable power supply which can easily be switched from a rechargeable lithium ion battery to an alkaline battery. They are equipped with a wide-eye lens and large pushbutton switch, suitable for operation while wearing gloves. The torches are available in orange or yellow.

The Breakthrough LED Right Angle Series uses smoke piercing SMO-KUT technology to provide superior performance for emergency situations.The 200 torch lumen BT2 offers a focused two degree beam, which makes it very effective at cutting through smoke. Specially design with an extra thick body to resist fire and/or heat.

The intrinsic Ion LED is a pen-style torch equipped with a pocket clip and magnet for easy portability. The slimline torch is powered by 3 AAA alkaline batteries and is watertight to 1 metre. It also has a deep dish parabolic reflector for a concentrated beam.

The Light Hawk is a super bright LED lantern with a rechargeable lithium ion battery.

The Rook series of torches are powerful, compact LED torches with a shape inspired by the chess piece, the rook. They are designed with a square, non-roll head and strike bezel. The range suits many applications including search and rescue, forensic and crime scene investigations, identification of documents and currency, map reading for pilots and astronomers and powerful light for first responders. Fire and impact resistant

The ultra-slim Command LED headlamps have a range of applications including firefighting, industrial inspections, forensic investigations, military work, search and rescue, hunting and scuba diving. They provide hands-free, focused and panoramic lighting in a variety of lamp colours to suit the various uses.

The SideSlide Flashlight and helmet lights are perfect for situations where use of a hand-held unit is in appropriate. Available in two configurations, C-Clamp or Bolt, the units are easily removable and reinstallable. Designed for durability, the aluminium housing is impact resistant and waterproof up to 6ft. Both configurations come with rear safety LED (green flashing) and 3 modes, High, Low, and Blinker.

The portable Nomad Series are cordless LED area lights and spotlights. They telescope up to 2.4 metres high as a tripod light and fold into an 84 cm tube for easy transportation. They are used to illuminate fire and rescue scenes and are also available in coloured lights for crime scene evidence gathering and forensic investigations. The infra-red version is suitable for military or stealth operations.

The Nomad 360, part of the Nomad series, is the ultimate LED scene light. The cordless Nomad 360 is easy to setup, approximately 30 seconds, and stows in a compact travel tube. The Nomad 360 is portable, rechargeable, self-contained and give the option of 360 degree scene light or a powerful 12 degree spotlight. Suitable uses include accident and crime scenes, perimeter lighting and more.

The Nomad Prime Portable LED Area-Spot Light, part of the Nomad series, is a powerful, portable, quick deployment combination LED Area light and Spotlight providing up to 4000 torch lumens. Powered by an internal Li-ion battery, the Nomad Prime Portable LED Area-Spot Light is rechargeable and is designed for use in fire, rescue, EM S, industrial and law enforcement scenarios. Meets NFPA 1971-2007, fire resistant requirements: 260 degrees Celsius for 30mins.

The Wormald Domestic Fire Fighting pump is designed for around the home, perfect for tackling small fires and protecting residential and rural properties during scrub fires.

The Wormald Domestic Fire Fighting pump is a portable, easy to use, fire fighting package able to pump water from swimming pools, tank supply or any other water source. Designed to be set up and used by one person if required. Set-up is simple and quick. Connect the suction hose to the pump outlet, start the motor, run out the delivery hose and aim the nozzle at the fire.

Stacking straps should always be used when stacking more than one bag. This ensures the bags remain in proper alignment and significantly reduces risk of slippage. Straps are available with two or three clips.

High pressure heavy lifting bags are thin profile and easy to use when a strong lifting force is needed in low clearance situations. They exert maximum force in a concentrated area making them ideal when lifting rigid structures in tight places.

Crisscross Kevlar reinforcing and thick, multi-layer rubber shell ensures durability under harsh conditions. The convex surface nodes create an interlocking surface which provides superior gripping power when the bags are stacked. Fifteen standard sizes are available. The high pressure lifting bags come equipped with safety straps (for bags of 18” or larger) which both assist in strapping the bags together and provide anchorage for the attachment of ropes so that rescue personnel don’t have to reach under an unstable load.

The Dual Deadman controller is recommended for precise inflation and deflation control of the air bags and accurately controls one or two bags from a single regulated air source.

Hand-Held Single and Double controllers are extremely solid and work well in environments where one handed operation is favoured.

The Quadracup® is a rugged dependable selectable gallonage nozzle with a retractable foam aspiration sleeve. When the outer sleeve is in the retracted position, the flow can be set to any one of four flow settings or to a flush mode. The front end can be rotated from straight stream through to wide fog patterns.

To engage the aspirating feature of the nozzle, the operator simply slides the outer sleeve forward. By adjusting the pattern, the fire fighter has control of reach and aspiration. The sleeve can be retracted instantly to its regular position for an immediate wide fog pattern.

The Quadrafog® is a compact, selectable gallongage nozzle that is rugged and dependable. The four flow settings of 110, 230, 360 and 470 litres per minute operate at a pressure of 7 bar. It is designed for use with 1-1/2” hose lines.

All Quadrafogs accept either the FJ-LX-FQ Foamjet low expansion or the FJ-MX-FQ Foamjet multi expansion foam aspiration attachments and come with a choice of fixed or stainless steel spinning fog teeth. It is available in a tip only configuration or with a stainless steel ball shutoff.

The Thunderfog® is available in two types: the 200 series with a selectable flow range of 110-750 l/min and the 250 series with a selectable flow range of 360-950 l/min. The 200 series is an excellent choice for 1.5” or 1.75” hose lines, and for higher flows, the 250 series will work with 1.5” to 2.5” lines.

Thunderfogs® are available in tip only configuration or with stainless steel ball shutoff. All Thunderfogs® accept either the FJ-LX-FQ Foamjet low expansion or the FJ-MX-FQ Foamjet multi expansion foam aspiration attachments and come with a choice of fixed or stainless steel spinning fog teeth.

The Ultimatic 125 series is compact, lightweight and an outstanding performer with 25mm and 38mm hose. The nozzles are fully automatic with a flow range from 40 to 500 l/min at 7 bar. They are available in several configurations for a wide variety of fire fighting applications.

It is adjustable from a straight stream to a dense fog pattern. The high strength bonded rubber fog teeth provide a full filled pattern that pushes heat, flames and smoke away from the fire fighting team. All Ultimatic 125 series are suitable for use with foam and accept either the FJ-U Foamjet low expansion or FJ-UMX Foamjet multi-expansion foam attachments.

The robust and technologically advanced G-Force® Nozzle series has a range of fixed, selectable and automatic options with calibrations from 100-570 l/min at 7bar or 5 bar. The G-Force® nozzle has a stainless steel slide valve with detent flow control which eliminates water turbulence when the nozzle is operated anywhere between fully open and closed. The tactile stream indicator is incorporated into the shaper bumper.

The shaper is available with fixed rubber fog teeth, fixed metal fog teeth or stainless steel spinning teeth and incorporates a rubber front bumper. It is supplied standard with an impact shock absorbing bumper, designed to reduce impact damage when dropped or used for forcible entry.

TFT in-line foam inductors have a metering head with an easy-to-read knob for use with Class A foam at 25% and 5% with ARC-AFFF foam at 1%, 3% and 6%. The large injection rate metering head indicators are easy to change and allow for accurate mixing of foam. The meter head is also equipped with a unique push-button back flush feature that allows for easy flushing of foam residue and ensures a clean unit for the next time it is used.

The 125 series is also available with an extra-large 36” pick up hose with stainless steel wand or direct truck connect pick up hose, which are ideal for use with high viscosity foams.

The Blitzfire® is a simple, light and highly manoeuvrable attack monitor. The low elevation angle makes it suitable for use indoors. It can go anywhere a handline goes while delivering much more water. The Blitzfire® is equipped with a patented safety valve, so if the unit starts to slide or lift, it automatically shuts off the flow of water to avoid risk of injury from an out-of-control appliance.

The Blitzfire® monitor has a flow range up to 2000 l/min and features low friction inlet and outlet pivots. The outlet has a built-in stream shaper. Elevation is manually adjustable between 10 and 46 degrees above horizontal and the horizontal rotation is manually adjustable to 20 degrees either side of centre.

The Crossfire® monitor is a versatile master stream appliance. It’s lightweight, compact design and unique quick release swivel joint allow for a fast and safe stream deployment in portable attack mode.

The Crossfire® is equipped with the Safe-Tak 1250™ portable base with flow safety valve. Should the monitor lose contact with the ground surface, the Safe-Tak will automatically reduce flow to the monitor. This reduces risk of injury from an out-of-control appliance.

The Crossfire Monitor top 65mm outlet can be connected either to a portable base or a truck with adaptors. When in use the release is locked out by water pressure. The 83mm waterway allows the Crossfire to deliver up to 4500 l/min with low friction loss.

The Tornado Monitor is a compact monitor for apparatus, front bumper applications or industrial fixed system installations. With a maximum flow rating of 1900 l/min, the Tornado monitor can be configured with a wide choice of nozzles and an integrated stainless shut off valve.

The Tornado Monitor is designed with locking, quick connect fittings for easy removal when servicing the apparatus. The Tornado Monitor is manufactured from lightweight high strength aluminium alloy that is hard coat anodized and powder coated for ultimate corrosion protection.

The Hurricane fixed station monitor is a durable, industrial, high capacity monitor with high flow rate and low friction loss. It delivers efficient flow performance up to 4500 l/min, provides full 360 degree rotational movement and is available with 3” or 4” ANSI 150 flanges, 3” NPT thread or with extended flange inlets to eliminate rotational clearance issues.

The red powder coat finish and stainless steel elevation drive ensure it stands up to tough fire fighting environments. It is efficient to use, with only 11 turns of the hand wheel needed to change from vertical to the horizontal elevation setting.

The Protector is a simple and rugged fixed station monitor ideally suited for high performance fire fighting in harsh industrial conditions. Its patented waterway gives low friction loss and delivers water to the nozzle with fewer twists and turns than a conventional monitor.

The Protector is capable of flowing up to 4500 l/min while maintaining full 360 degree rotational ability. The unit can be directly bolted to many common pipe flanges and the outlet is available with various 65mm male threads. The monitor is a simple design that requires minimal maintenance. Swivelling elements and seals can be replaced within a few minutes with common hand tools and no grease application is required.

MX TECHNOLOGY® brings together the latest fire detection technology from around the world into a comprehensive international range of fire detection systems. A combination of the VIGILANT® MX4428 Fire Indicator Panel, equipment with MX Series Addressable Modules and MX VIRTUAL® Multi-Sensor Fire Detectors can be used to provide cost effective solutions on small fire detection systems, whilst also providing the features and functions required for very large industrial and multi-building sites.

With inbuilt intelligent detection algorithms, the VIGILANT® MX4428 Fire Indicator Panel offers a highly sensitive and rapid response to fire conditions, yet delivers a very low false alarm rate.

The VIGILANT® QE90 Emergency Warning and Intercommunication System (EWIS) facilitates the orderly evacuation of a building in the event of an emergency.

Whether it is initiated automatically by a fire alarm system, or by a building occupant setting off an emergency break glass alarm, the VIGILANT® QE90 responds in seconds to help protect your people, property and business. It features an integrated and flexible alarm and voice warning system with a dedicated emergency telephone network and all the tools fire wardens or emergency services personnel need to control and coordinate rapid building evacuation.

OMEGA 64 is a microprocessor based conventional fire alarm system, which is simple to operate and easy to maintain. It is intended for medium to large conventional fire alarm systems, providing reliable and economical monitoring of up to 96 fire detection zones. The control panel cabinet is modular in design, allowing expansion to suit the system size. The capacity of the internal power supply can also be increased for larger systems. Flexible input and output programming allows the OMEGA 64 to be utilised in a wide range of fire alarm monitoring, control, and signalling applications.

FP1600 is a microprocessor based conventional fire alarm system, which is simple to operate and easy to maintain. It is self contained, with integral power supply and battery storage within a compact and unobtrusive cabinet. It provides reliable and economical monitoring for up to 16 fire detection zones. The flexibile input and output programming of the FP1600 allows it to be utilised in a wide range of fire alarm monitoring, control, and signalling applications.

SIGMA 5 is a microprocessor based fire alarm system that is simple to operate and easy to maintain. It is self contained, with integral power supply and battery storage within a compact and unobtrusive cabinet. It provides reliable and economical monitoring for up to 5 fire detection zones, which may include smoke detectors, heat detectors, manual call points and other compatible devices. SIGMA 5’s flexibility and versatile input/ output programming allow it to perform a wide range of fire alarm monitoring, control and signalling applications.

The Vigilant ALPHA 1 and ALPHA 4 fire alarm systems are ideal for smaller buildings where a brigade connection is not required. The control panels are compact and neat in appearance, suitable for mounting in a wide variety of areas. Microprocessor technology enables some of the advanced features usually associated with larger, more elaborate fire alarm systems to be incorporated in the control panel design. When used with high quality fire detectors, manual call points and alerting devices, ALPHA provides fire alarm systems that are both reliable and easy to operate. They are also simple to install, test and maintain.

The MX VIRTUAL® multi-sensor fire, smoke and heat detectors are ideal when installed with a VIGILANT® MX4428 Fire Indicator Panel. They provides highly advanced, flexible fire detection technology in an attractive and cost effective package.

MX VIRTUAL® multi-sensor analogue addressable detectors are robust. They provide rapid response to fire conditions, with a very low false alarm rate. MX multi- sensor detectors include multiple detecting capabilities in a single unit.

A comprehensive range of audio ancillaries for Alarm and Emergency Warning and Intercommunication Systems. From microphones to speakers, sounders and bells, all your warning system requirements are available.

This range of audio Warning Systems Ancillaries includes a wide range of ancillaries. Please download the Warning Systems Ancillaries – Audio datasheet for further details on available products.

A comprehensive range of visual devices that provide notification via lights, alerting persons of a fire event. A comprehensive range of Visual Warning ancillaries for Emergency Warning and Intercommunication Systems. From occupant warning strobes to external fire strobes and audio visual warning signs, all your warning system requirements are available.

T-GEN 50 is a tone generator and Public Access (PA) amplifier module for use as an occupant warning system, providing 50 watts rms of tone into a 100 volt line. Ideal for nursing homes and back packers accommodation.

The T-GEN 50 tone generator and PA amplifier module generates emergency warning signals for alarm and occupant warning systems where a full Emergency Warning and Intercommunication System (EWIS) approved to Australian Standards AS2220 or AS1670.4, is not required. Different tones can be selected including the AS2220 Alert and Evacuate signals and the ISO 8201 Temporal pattern Evacuate Signal. T-GEN 50 provides speaker line fault supervision, public address facilities and pre-recorded voice messages. Readily available accessories ensure that installing the T-GEN 50 is quick and easy.

Providing both visual and audible warning, the Mk 2 Audio Visual Indicator (AVI) sign is ideally suited for gas suppression installations where occupants need precise and accurate warning.

The AVI is an illuminated warning sign that produces distinct audible and visual indication. It is designed for use with fire alarm or gaseous fire extinguishing systems, or in other applications where clear audio-visual warning is required. When activated, the AVI’s internal LEDs illuminate the faceplate lettering and the internal loudspeaker produces audible warning signals.

The MINERVA® S200 PLUS family of infrared flame detectors lend themselves to intrinsically safe and flameproof environments when the source of fire is flammable/volatile areas, such as; in process areas, aircraft hangers, petro-chemical facilities.

The MINERVA® S200 PLUS flame detectors are the latest step in over 30 years experience of developing and manufacturing infrared, solar blind and multi-channel infrared flame detectors with low power consumption and high false alarm immunity. The MINERVA® S200 PLUS incorporates the patented dual solar blind feature of the S100 and S200 flame detectors which have over 26,000 installations world-wide.

The MINERVA® S200 PLUS range of advanced flame detectors is the most comprehensive range available. The devices are available in both “Intrinsically Safe” or “Flameproof” versions incorporating a variety of electrical interfaces, which are all supported through the existing range of MINERVA® fire control panels.

A sound level meter and speech intelligibility analyser using the Speech Transmission Index - Common Intelligibility Scale (STI-CIS) methods of measurement, is used together with the TALKBox and STI-PA sound source, to test Sound Systems For Emergency Purposes installed to AS 1670.4 for compliance with intelligibility and audibility requirements.

INERGEN is a mixture of nitrogen, argon and carbon dioxide, and has been specially developed to provide fire protection for sensitive electrical and electronic instruments and equipment.

INERGEN extinguishes fire by reducing the oxygen level in a room to below 15% (the point at which most combustibles will no longer burn). Simultaneously the patented carbon dioxide in INERGEN protects anyone that may be trapped in the fire area from the effects of the lowered oxygen levels, by increasing the rate of respiration.

Gas suppression systems are extensively used in electronic data protection and electrical system switch environments. Systems comprise electrical detection linked to a bank of cylinders where the gas is stored ready for discharge into the fire area.

The FM-200® gaseous system uses a regulated greenhouse gas, under the Ozone Depleting Substances & Synthetic Greenhouse Gases (ODS & SGG) Management Regulations 1995. This gaseous system works in seconds and is readily suited to the protection of high value assets.

The FM-200® provides total flood when used in; computer and electronic control rooms, telecommunication and switch rooms, data processing centres, vaults/tape storage, marine machinery spaces, chemical storage and clean rooms, medical laboratories and emergency power facilities.

Carbon dioxide is a clean gaseous agent, in plentiful supply and can be stored in either high pressure cylinders or low pressure tanks. It has been used effectively as a fire extinguishing gas since the early 1900’s.

Carbon Dioxide systems can be used for either total flooding or local application and are ideal for protecting high value assets where large quantities of agent is required. These include dip tanks, rolling mills, data processing centres, vaults/tape storage and marine machinery spaces.

FireTrace® is an automatic, pre-engineered system designed to be used in non-occupied, small or enclosed spaces such as those used for switchboards and control panels.

A unique, cost-effective, automatic fire suppression system, FireTrace® offers complete installation flexibility due to its stand-alone design and operation. No additional electrical or plumbing connections are required for its operation, making it ideal for new construction, retrofitting or mobile applications.

FireTrace® uses carbon dioxide gas to extinguish fire directly at its source, utilising a pressurised flexi-tube delivery system that allows FireTrace® to be installed virtually anywhere that a fire risk exists.

AquaMist® open nozzle systems are designed for use in total flood water mist systems, protecting flammable liquids risks, gas turbine and turbine bearings. These mist systems are commonly used in; machinery spaces, engine test cells, flammable liquid storage areas and around industrial process equipment.

The Aquasonic™ water-atomizing fire suppression system is a total flood system designed to protect Class B flammable liquid hazards in machinery spaces, both insulated and non-insulated combustion turbine enclosures, generator enclosures, and flammable liquid storage.

The Aquasonic™ system can protect a potential hazard with a free volume up to 260 m3 with two atomizers that use low pressure, dual flow, supersonic atomization technology to create a minimum 10-minute discharge plume of water droplets that are the optimum size to suppress a Class B fire.