Total Marine Engineering Service Provider

Ideally suited for personal monitoring applications, the Drager Pac 5500 provides quick detection of carbon monoxide, hydrogen sulfide or oxygen. Accurate, reliable and easy to use, this small, ergonomic instrument has no lifetime limitation.

The disposable personal single-gas detection device, Drager Pac® 6000, measures CO, H2S, SO2 or O2 reliably and precisely, even in the toughest conditions. The robust design, quick sensor response times, and a powerful battery ensure maximum safety for up to two years with virtually no maintenance required.

Strong performance for maximum safety - You can rely on the Drager Pac 6000: The personal single gas detection device warns against hazardous concentrations of carbon monoxide, hydrogen sulphide, sulphur dioxide or oxygen with precision and reliability. Powerful sensors with a very low t-90 response time ensure quick reactions. The Pac 6000 is versatile thanks to its wide measurement range. For example, the CO sensor measures concentrations from 1 to 1,999 ppm, and the H2S sensor from 0.4 to 100 ppm.

The robust Drager Pac® 6500 is your reliable companion under tough conditions. The personal single-gas detection device measures CO, H2S, SO2 or O2 quickly and precisely. Quick sensor response times and a powerful battery also ensure safety.

Strong performance for maximum safety - You can rely on the Drager Pac 6500: the personal single-gas detection device warns against hazardous concentrations of carbon monoxide, hydrogen sulphide, sulphur dioxide or oxygen with precision and reliability. Powerful sensors with a very low t-90 response time ensure quick reactions. The Pac 6500 is versatile thanks to its wide measurement range. For example, the CO sensor measures concentrations from 1 to 1,999 ppm, and the H2S sensor from 0.4 to 100 ppm.

Small and robust, ergonomic and intuitive, economic and powerful - the Drager Pac 7000 is tailor-made for personal monitoring at the workplace. This innovative single gas detector is equipped with a wide range of functions and is suitable for many different applications in day-to-day industrial settings. The detector is an impressive instrument, offering a high level of reliability and rapid warning against harmful concentrations of CO, CO2, Cl2, HCN, H2S, NH3, NO2, O2, PH3, SO2.

With the robust Drager Pac® 8000, you'll be well equipped for tough conditions: this non-disposable, personal single-gas detection device is a reliable and precise instrument, which detects hazardous concentrations of 29 different gases, including special gases like NO2, O3 or COCl2.

Strong performance for maximum safety - You can count on the Drager Pac 8000 to give you reliable, precise readings at any time even in extreme conditions. Our powerful sensors with a low t-90 response time ensure quick reactions. In addition to the standard alarms, you can define extra alarm thresholds for TLV®* and STEL*.

* TLV® = Threshold Limit Values, STEL = Short Term Exposure Limit

Sensors for special gases - The Pac 8000 can be fitted with sensors for carbon dioxide (CO2), chlorine gas (Cl2), hydrogen cyanide (HCN), ammonia (NH3), nitrogen dioxide (NO2), phosphine (PH3) and organic vapours (OV or OV-A).

The Drager Pac 8000 performs especially well when detecting different special gases: it can detect ozone (O3) from concentrations as low as 0.02 ppm and phosgene (COCL2) from 0.01 ppm. The Pac 8000 detects nitrogen dioxide (NO2) from concentrations as low as 0.04 ppm.

The Drager Pac® 8500 single-gas detection device is a reliable and precise instrument even under the toughest of conditions. The device can be equipped with a hydrogen-compensated CO sensor or a Drager dual sensor. This gives you the option of measuring two gases at once: either H2S with CO or O2 with CO.

Strong performance for maximum safety - You can count on the Drager Pac 8500 to give you reliable, precise readings at any time even under extreme conditions. Our powerful sensors with a low t-90 response time ensure quick reactions. In addition to the standard alarms, you can define extra alarm thresholds for TLV®* and STEL*.

For manufacturing petrochemical products, aseptic packing, or handling of rocket fuel: the Drager X-am 5100 portable single-gas detector guarantees that you use the safest methods possible for handling HF, HCl, H2O2 or hydrazine - thanks to proven Drager sensor technology and a device design which is perfectly customised to reactive gases.

The Drager X-am 3500 was especially designed for clearance measurements. The 1 to 4 gas detector reliably detects flammable gases and vapours as well as O2, CO, H2S, NO2 and SO2. The innovative signalling design and extensive range of accessories ensure optimum safety and easy handling.

The Drager X-am 5000 is the smallest gas detector that is suitable for up to five gases. Part of a new generation of gas detectors, the X-am 5000 was designed especially for applications requiring personal monitoring.

This 1 to 5-gas detector reliably measures combustible gases and vapours as well as oxygen and harmful concentrations of CO, H2S, CO2, Cl2, HCN, NH3, NO2, PH3 and SO2. An added advantage of the X-am 5000 is a variety of special calibrations for the catalytic Ex sensor allow even more sensitivity when detecting specific combustible gases and vapours. The X-am 5000 is also equipped with durable XXS sensor technology. The Drager X-am 5000's key feature is that it offers maximum security and extremely low operational costs.

Featuring an ergonomic design and innovative infrared sensor technology, the Drager X-am 5600 is the smallest gas detection instrument for the measurement of up to 6 gases. Ideal for personal monitoring applications, this robust and water-tight detector provides accurate, reliable measurements of explosive, combustible and toxic gases and vapors as well as oxygen.

SMALL YET ROBUST - Small, light and easy to use - the robust and water-tight Drager X-am 5600 is designed for single-handed operation in tough industrial environments. Water- and dustproof according to IP 67 and with an integrated rubber boot, the device provides optimal functionality even under harsh conditions.

The Drager X-am 7000 is the innovative solution for the simultaneous and continuous detection of up to five gases. A combination of more than 25 sensors allows flexible solutions to individual monitoring tasks. The Drager X-am 7000 can be equipped with three electrochemical, and two catalytic bead, infrared or photoionisation sensors. It is the ideal companion in a great number of applications where reliable monitoring of Oxygen, toxic and combustibles gases and vapors in the ambient air is necessary.

The extensive portfolio of over 25 different DragerSensors allows the detection of more than 100 gases and vapors. The measuring range of the EC, Cat-Ex, IR and PID sensors can be changed to another gas within a list of gases by a push of a button - without the necessity of re-calibrating. In this way the instrument can be adapted easily to various applications. DragerSensors are renowned for fast response, minor cross sensitivities, high accuracy and long life.

Clearance measurement was never this easy and convenient: The Drager X-am 8000 1 to 7 gas detector detects toxic and flammable gases as well as vapours and oxygen all at once - either in pump or diffusion mode. Innovative signalling design and handy assistant functions ensure complete safety throughout the process.

Specially designed for use with a pump, optimised for clearance measurement The X-am 8000 is equipped with a very powerful pump. It can be connected with hoses of up to 45 metres in length. A pump adapter makes it easy to switch between diffusion and pump mode at any time. This means the pump is only operated when you actually need it. That saves energy, reduces wear and tear, and thereby extends the lifespan of the pump. Handy and durable, the X-am 8000 is intuitive to operate single-handedly using three function keys. The easy-to-read colour display clearly lays out all the information for you. Standard accessories include a sturdy shoulder strap, so you can comfortably carry the X-am 8000. Thanks to its compact and robust construction, the device can withstand even the harshest conditions.

Area monitoring without limits - the Drager X-zone 5000. In combination with the Drager X-am 5000, the X-zone 5000 reliably monitors for up to six hazardous gases and warns at preset levels. This easily transportable, robust and water-proof unit extends mobile gas detection technology to a unique system with many applications.

INNOVATIVE AREA MONITORING - The Drager X-zone 5000 transforms the Drager X-am 5000 personal gas detection instrument into an innovative area monitoring device for a wide range of applications. A patented combination for increased safety - used with personal gas air monitoring carried on the body or positioned where gas hazards are expected, the X-zone 5000 area monitor knows no limits!.

In combination with the Drager X-am 5000, 5100 or 5600 gas detection instruments, the the Drager X-zone 5500 provides state-of-the-art area monitoring. The system can be used for the measurement of up to six gases and extends the portable gas detection technology to a unique system with many applications.

The Drager X-Zone 5500 transforms the Drager personal gas detection instruments X-am 5000, 5100 and 5600 into innovative area monitoring devices for a wide range of applications. A patented combination for increased safety - in addition to the personal air monitors carried on the body, these area monitors are positioned where gas hazards are expected.

The Drager Polytron 7000 is a gas detector that can satisfy all toxic and oxygen gas measurement applications on a single platform. It is meeting the requirements of the compliance market as well as the high specification requirements of customized solutions.

The Drager PIR 7000 is an explosion proof point infrared gas detector for continuous monitoring of flammable gases and vapours.

The Drager Polytron Pulsar 2 is the latest infrared technology in open path gas detection. Equipped with all the same functions as the standard Drager Pulsar, Pulsar 2 is fitted with an ABS moulded cover and is supplied with either a junction box or certified connector to provide complete flexibility during installation.

The Drager PIR 7200 is an explosion proof point infrared gas detector for continuous monitoring of carbon dioxide. Designed for the industrial use, the transmitter offers drift-free optics. And due to its robust product design the PIR 7200 can be operated even in harsh environments.

The transmitter Drager PEX 3000 detects flammable gases and vapors in concentrations below their Lower Explosion Limit. Its DD-sensor provides a very long-term stable measuring signal and responds to gas in only a few seconds.

The Drager PIR 3000 is an explosion proof infrared gas detector for continuous monitoring of combustible gases and vapors. Based on a stainless steel SS 316 enclosure as well as on a good measuring performance, this transmitter offers an excellent price-performance-ratio.

The transmitter microprocessor based is equipped with various electrochemical sensors such as the DragerSensors that detect oxygen easily and various toxic gases in the ambient air around. In addition, The Polytron 5100 in addition to this can also be integrated with a safety system and a facility control providing additional diagnostic functions.

Quick, reliable and cost-effective detection of combustible gases and vapors in ambient air: the microprocessor-based transmitter is the result of more than 40 years of experience in measurement technology. In addition, the CatEx sensor of the Polytron 5200 DD can be replaced with a more poison-resistant IR sensor, upgrading the Polytron 5200 DD to an IR device (Polytron 5310).

Quick, reliable and cost-effective detection of combustible gases and vapors in ambient air: the microprocessor-based Polytron 5310 transmitter is the result of more than 40 years of experience in measurement technology and contains a durable, poison-resistant IR sensor.

The Polytron® 8100 EC is Drager's top of the line explosion proof transmitter for the detection of toxic gases or oxygen. It uses a high performance plug and play electrochemical DragerSensor® to detect a specific gas. Besides a 3 wire 4 to 20 mA analogue output with relays, it also offers Modbus and Fieldbus protocol making it compatible with most control systems.

Quick, reliable and cost-effective detection of combustible gases and vapours in the ambient air: The Drager Polytron 8310, which contains a durable, poison-resistant IR sensor, can also be integrated into your digital fieldbus system, thus providing additional diagnostic functions.

Drager has been developing and manufacturing sensors and gas detectors for industrial use for more than 40 years. And with each new device generation, we drive our measurement technology a bit further. With the Polytron 5700, you will definitely benefit from this experience and power of innovation. Its sensors are based on an open, double-compensated optical infrared system.

The Drager Polytron 5720 IR is a cost effective explosion proof transmitter for the detection of carbon dioxide in percent volume or ppm. It uses a high performance infrared Drager PIR 7200 sensor, which can be submerged in water without damage. A 3 wire 4 to 20 mA analog output with relays makes it compatible with most control systems.

The Drager Polytron® 8700 IR is an advanced explosion proof transmitter for the detection of combustible gases in the lower explosion limit (LEL). It uses a high performance infrared Drager PIR 7000 sensor, which will quickly detect most common hydrocarbon gases. Besides a 3 wire 4 to 20 mA analogue output with relays, it also offers Modbus and Fieldbus making it compatible with most control systems.

Quick, reliable and cost-effective detection of combustible gases and vapours in the ambient air: the microprocessor-based transmitter is the result of more than 40 years of experience in measurement technology. In addition, the Polytron 8200 can also be integrated into your digital fieldbus system, thus providing additional diagnostic functions.

The Drager Polytron 3500 is a transmitter for the continuous monitoring of NF3 and PFCs (perfluoro compounds) e.g. C4F6, C5F8 in ambient air.

The microprocessor-based transmitter can be equipped with various electrochemical DragerSensors. This way, you can detect oxygen and various toxic gases in ambient air - reliably, quickly and cost-effectively, as the Polytron 5000 is the result of more than 40 years of experience in measurement technology.

The Drager Polytron 7500 is a transmitter for the continuous monitoring of NF3 and PFCs (perfluoro compounds) e.g. C4F6, C5F8 in ambient air. It is the advanced version of the new modular Polytron Pyrolyzer family from Drager Safety.

The microprocessor-based transmitter can be equipped with various electrochemical DragerSensors. This way, you can easily detect oxygen and various toxic gases in the ambient air. In addition, the Polytron 8000 can also be integrated into your digital fieldbus system, thus providing additional diagnostic functions.

The Drager Flame 1700 is an UV flame detector, designed for the detection of non-organic based fires such as hydrogen and metals as well as organic based fires. The detector provides flexibility with its numerous output modes, and advanced design features ensure reliability and speed in the detection of such fires.

The Drager Flame 2300 is an explosion proof combined UVIR flame detector used for the detection of hydrocarbon based fires. The detector provides flexibility with its numerous output modes, and advanced design features ensure reliability in the detection of fires whilst at the same time providing excellent immunity to potential false alarm sources.

The Drager Flame 5000 is an imaging based explosion proof flame detector. This visual flame detection system uses digital image processing and advanced algorithms to process and interpret flame characteristics.

The Drager FS-10 has been designed as a test torch in order of testing the function of the Drager Flame 1300 IR Detector, Drager Flame 1700 UV Detector and Drager Flame 2300 UVIR Flame Detector in hazardous areas. The simulation of the presence of fire or flames is carried out by the Drager FS-5000 in order to test the correct operation of the Drager Flame 5000 CCTV Detector.

The Drager Regard-1 is a standalone, self contained single channel control system for the detection of Toxic, Oxygen and Ex hazards. The control system is fully configurable for a single input from either a 4 to 20 mA transmitter or a Drager Polytron SE Ex measuring head.

The devices of the Drager Regard 3900 Series can be used as standalone controllers. You can configure up to 16 measuring channels. In addition, the modular setup enables you to customise the control units to the demands of your plant. You can also embed further features to existing alarms.

The Drager QuadGard is a standalone, self contained control system for the detection of Toxic, Oxygen and Ex hazards. The system can be configured for up to four independent gas detectors.