CONSILIUM
CONSILIUM's Salwico Fire and Gas Detection Systems are the world’s most famous for ships in general and for LNG vessels and Cruise ships in particular. Both systems are based on Consilium’s new and advanced technical base, a common platform for all our safety solutions. Since the first Salwico gas detector was delivered in 1959, Consilium has become one of the leading suppliers on the market and our Salwico systems can be found on all kind of ships, most often in combined set up’s incorporating our fire detection systems as well as gas detection. Over the years the Salwico range has developed and today’s systems are considered to be top of the line having all the qualities and features that can be expected from the user as well as the installer.
During the last years, Consilium has taken all the knowledge and experience from well-known brand names such as Salwico, Nittan and Servoteknikk and created a highly advanced technological common platform, not only for fire detection systems, but also for gas detection systems and voyage data recorders (VDR). The CCP (Consilium Common Platform) is the base for our 5th generation of analog addressable fire detection systems with the latest innovative solutions based on top notch technology.-
SALWICO is famous for their Fire and Gas Detection Systems. The Systems from Salwico are suited for use in the maritime market, and especially for LNG vessels and cruise ships. Worldwide, more then 10.000 Salwico Systems are installed on vessels such as Tankers, Tugs, LNG Vessels, Submarines and large cruise ships.
Salwico offers both conventional and addressable Fire and Gas Detection Systems. The Systems form Salwico are all approved by the major classification societies worldwide. Salwico also offers 2 types of Gas Detection Systems. Sampling and loop configured analogue addressable systems.-
SALWICO Flame Detectors
Salwico 601FEX-M Intrinsically Safe Point Flame Detector (001142)
The Salwico 601FEX-M (001142) Intrinsically Safe Point Flame Detector is a conventional Detector. It is a fully featured solar blind Flame Detector for indoor use and boasts a high degree of false alarm immunity.
The Salwico 601FEX-M is an Intrinsically Safe version intended for use in hazardous atmospheres and must be connected via a suitable isolator or shunt diode safety barrier in a certified intrinsically safe system. Fits a standard point fire Detector Base. The Salwico 601FEX-M detects a 0.1m2 fire at a range of 20m and has an integral alarm LED with 360º angle of view.-
Salwico AC-IR-3Fq IR Flame Detector (5200236-00A)
The Salwico AC-IR-3Fq (5200236-00A) is a triple frequency conventional infrared Flame Detector. The Salwico AC-IR-3Fq uses infrared elements that are suitable for the detection of smokeless combustible liquid and gas fires as well as smoke-forming open fire involving carbonaceous materials as contained in wood, plastics, gases, oil products etc.-
Salwico CD-F-300 Visual Flame Detector
The Salwico CD-F-300 is an explosion-proof visual Flame Detector designed for use in hazardous areas. The Salwico CD-F-300 Flame Detector is used in areas where optical flamed detection is critical and nuisance alarms are not an option. This Salwico Flame Detector processes live video images to detect the characteristic properties of flames means of its digital signal processing and hardcoded software algorithms.-
Salwico CD-F-301 Visual Flame Detector
The Salwico CD-F-301 is an explosion-proof visual Flame Detector designed for use in hazardous areas. The Salwico CD-F-301 is used in areas where optical flame detection is critical and nuisance alarms are not an option. The Salwico CD-F-301 Flame Detector processes live video images to detect the characteristic properties of flames means of its digital signal processing and hardcoded software algorithms.-
Salwico EVC-IR Dual Band Flame Detector (5200039-00A)
The Salwico EVC-IR (5200039-00A) is a Conventional Dual Band IR Flame Detector. This Flame Detector has an 360° LED Omniview and an internal alarm current limiting resistor.-
Salwico IRFD-1 IR Flame Detector
The Salwico IRFD-1 IR Flame Detector is obsolete and is replaced by the Salwico EVC-IR.-
Salwico NS-AUV Addressable UV Flame Detector
The Salwico NS-AUV is an analogue addressable Flame Detector for addressable fire alarm systems. It is sensitive to ultraviolet light emitted by flames. Due to its high sensitivity to UV-light, the Detector has a built-in advanced alarm algorithm to avoid false alarms. Thanks to the very wide supervising angle it can cover large areas, and the UV tube is protected by a quartz glass. The Salwico NS-AUV Flame Detector is very suitable for use in harsh environments. When this Flame Detector is in alarm condition, a red LED on the Detector will be lit.-
Salwico NS-DIR Conventional IR Flame Detector
The Salwico NS-DIR is obsolete and is replaced by the Salwico EVC-IR.-
Salwico NS-DUV Conventional UV Flame Detector
The Salwico NS-DUV is obsolete and is replaced by the Salwico EVC-IR.-
Salwico UVFD-2 UV Flame Detector
The Salwico UVFD-2 UV P/N 1137 Flame Detector is obsolete.
We still have a limited amount available in stock.-
SALWICO Flame Detector Testers
Salwico 1150 Ultraviolet Test Lamp
The Salwico 1150 UV Test Lamp is obsolete, and there is no suitable replacement at this point.-
Salwico 1155 UV Test Lamp
The Salwico 1155 UV Test Lamp is used to test Salwico UV Flame Detectors. The Salwico 1155 UV Test Lamp will be delivered complete with rechargeable Batteries and a Battery Charger.-
Salwico 1156 IR Test Lamp
The Salwico 1156 is a IR Test Lamp that is used to test the Salwico NS-DIR IP67 IR Flame Detector. The Salwico 1156 IR Test Lamp comes with an extension rod, which makes it possible to test the Detector in all environments.
With the Salwico 1156 IR Test Lamp it is possible to test the Detector in 2 ways. The Salwico 1156 can be pressed against the Detector until the Detector causes the tripping of the test initiation switch with an intermittent buzzer sound. After 10-15 seconds, the Detector should have operated.-
SALWICO Gas Detection Systems
Salwico GS4 Gas Alarm Central
The Salwico GS4 is a one to four channel Gas Detection Control System that is designed for wall mounting purposes. The Salwico GS4 can be used for small stationary gas detection installations to monitor explosive and/or toxic gases. The Salwico GS4 Gas Detection Control System features 4 fully independent input channels, which are designed for standard 4-20mA sensing head signals through 2 or 3 core wire connections.-
Salwico GS3000 Gas Detection System
The Salwico GS3000 is a loop-configured analogue addressable Gas Detection System which can be found in offshore applications, onboard of LNG carriers and many other installations.-
Salwico GS5000 Gas Detection System
The Salwico GS5000 is a Gas Detection System, designed to be used on COT´s. P-C´s, offshore vessels and other specialized vessels. The Salwico GS5000 is built on the same flexible and modular platform as the Salwico Fire Detection Systems. This ensures significantly reduced lifetime cost as the maintenance and service can be done by the same service engineer, and the spare parts can be used for several systems.-
Salwico KVC-41 Gas Detection System
The Salwico KVC-41 is obsolete and only spare parts are available.-
Salwico SW2020 Gas Sampling System
The Salwico SW2020 is an automatically scanning Gas Sampling System installed for a number of sampling points. The Gas Detectors are common for all sampling points. A gas sample is taken from each sampling point.-
SALWICO Gas Detectors
Salwico GD Series Gas Detector
The Salwico GD is a range of Gas Detectors. The Salwico GD Gas Detectors are used to monitor areas where flammable, oxygen deficiency and toxic gases can become a hazard. The Salwico GD Series Gas Detector has various sensor technologies that include catalytic bead, electrochemical cell and non-dispersed (NDIR).-
Salwico GD Open Path Gas Detector (5201054-00A)
The Salwico GD (5201054-00A) is an Open Path Gas Detector to monitor the gas concentrations in potentially hazardous environments. The solid state design of the Salwico GD Open Path improves the reliability, the long-term stability and the accuracy in continuous measurement of gas concentrations in the ambient air.-
Salwico GD 316 SS enclosure Gas Detector
The Salwico GD 316 SS is a range of Gas Detectors, that are used to monitor areas where flammable, oxygen deficiency and toxic gases may pose a hazardous situation. The Salwico GD316 uses a number of sensor technologies that include catalytic bead, electrochemical cell and non-dispersed (NDIR).-
Salwico GD SS HART Gas Detector
The Salwico GD SS HART Gas Detector range is used to monitor areas where flammable, oxygen deficiency and toxic gases may become a hazard. The Salwico GS SS Gas Detector uses various sensor technologies such as catalytic bead and electrochemical cell. The stainless steel enclosure of the Salwico GD HART makes it suitable to be used in harsh environments.-
Salwico GD TRUE IR HART Point Gas Detector
The Salwico GD TRUE IR HART is a Point Gas Detector to monitor gas concentrations in potentially hazardous environments. The Salwico GD TRUE IR is based on IR absorption. The solid state design of the Salwico GD TRUE IR HART improves the reliability, long-term stability and accuracy in continuous measurement of gas concentrations in the ambient air.-
Salwico GD TRUE IR Gas Detector
The Salwico GD TRUE IR is a Point Gas Detector that monitors the gas concentration in potentially hazardous environments. The Salwico GD TRUE IR is based on IR absorption. The solid state design of the GD TRUE IR improves the reliability, long-term stability and accuracy in the measurement of gas concentrations in ambient air.-
Salwico ST200 Gas Detector
The Salwico ST200 is a Gas Detector for combustible gases. All of the important calibration functions are inside of the ST700IR. This ensures that the Salwico ST200 Gas Detector can be calibrated by one person.
The sensor of the Salwico ST200 is a replaceable catalytic oxidation sensor that consists of the detection and reference elements that are provided in a wheatstone bridge. When the Sensor is exposed to gas, the bridge will be unbalanced and an electric signal that is proportional to the gas concentration will be converted to a 4-20mA output signal.-
.
Salwico ST350-EX Gas Detector
The Salwico ST350EX is a Gas Detector that is specifically designed fot the leak detection and measurement of hydrocarbons, refrigerant and air-conditioning gases including CFC's, HFC's and HCFC's. The Salwico ST350EX is suitable to detect a wide range of gases at low ppm levels, which are mostly undetectable by other type of sensor heads. The Sensor head of the ST350EX consists of an EEx d Sensor, a housing and a cable gland.-
Salwico ST400 Gas Detector
The Salwico ST400 Gas Detector to measure oxygen, toxic or flammable gases consists of a chrome plated ABS housing with Transmitter print, Sensor and sensor holder in stainless steel. The Transmitter print is based on the 'one man calibration' technology. This means that one person can make all the necessary calibrations inside the Detector head, without the necessity of a second calibration procedure on the measurement module.-
Salwico ST400-EC Gas Detector
The Salwico ST400EC is a Gas Detector, designed to detect oxygen, toxic gases or hydrogen. This Salwico Gas Detector can be calibrated at the Detector head by one man only. The chemical reaction in the Salwico ST400EC produces a current output signal. The obtained signal, proportional with the gas concentration, will be converted in a linear output signal, 4-20 mA, 2 wire.-
Salwico ST600EX Gas Detector
The Salwico ST600EX is a Gas Sensor/Transmitter for combustible gases. The sensor head of the ST600EX consists of an EEx d sensor, a housing and a cable gland. The internal Transmitter board can be calibrated on site by one person.
The sensor of the Salwico ST600 EX is a replaceable catalytic burning Sensor. The Sensor consists of a detection element and a reference element which are provided in a wheatstone bridge. When gas reaches the Sensor, the bridge will be out of balance. The electric signal that is obtained is proportional to the gas concentration and will be converted in a linear output 4-20 mA output signal.
Salwico ST650-EX Gas Detector
The Salwico ST650EX is an explosion-proof Gas Detector for combustible gases. The sensor head of the ST650EX consists of an EEx d Sensor, a housing and a cable gland. The internal Transmitter board can be calibrated on site by one person.
The Sensor of the Salwico ST650 EX is a BUSENS type replaceable catalytic burning Sensor. The Sensor consists of a detection element and a reference element which are provided in a wheatstone bridge. When gas reaches the Sensor, the bridge will be out of balance. The electric signal that is obtained is proportional to the gas concentration and will be converted in a linear output 4-20 mA output signal.-
Salwico ST700IR Gas Detector
The Salwico ST700IR is a Gas Detector for combustible gases. The sensing head of the Salwico ST700IR is equipped with a replaceable IR sensor. The ST700IR is fully digital and extremely accurate. The output signal is a standardized 4-20 mA signal and the power supply of the sensing head is supplied by a three-core screened connection cable.-
SALWICO Heat Detectors
Salwico EC-H/A1R 58°C Heat Detector (5200174-00A)
The Salwico EC-H/A1R is a 58°C Conventional Heat Detector (5200174-00A) that belongs to the Salwico EC-range of Detectors. The Salwico EC-H/A1R Heat Detector uses a thermal element combined with an application specific integrated circuit (ASIC) to provide quick and accurate detection of fires. The Salwico EC-H/A1R Heat Detector provides both Rate-of-Rise and static elements, and is suitable for areas where there are normally no rapid changes in temperature.-
Salwico EC-H/A2S 58°C Heat Detector (5200172-00A)
The Salwico EC-H-A2S 58°C P/N (5200172-00A) is a Conventional Heat Detector. The Salwico EC-H/A2S uses a state of the art thermal element, combined with an application specific integrated circuit (ASIC), to provide quick and accurate of fires. The Salwico EC-H/A2S Heat Detector is suitable for areas there a rapid change in the ambient temperature normally occur.-
Salwico EC-H/BS 78°C Conventional Heat Detector (5200173-00A)
The Salwico EC-H/BS 78C PN (5200173-00A) is a Conventional Heat Detector. The Salwico EC-H/BS uses a state of the art thermal element, combined with an application specific integrated circuit (ASIC), to provide quick and accurate of fires. The Salwico EC-H/BS Heat Detector is suitable for areas there a rapid change in the ambient temperature normally occur.-
Salwico EV-H Heat Detector
The Salwico EV-H is an analogue addressable Heat Detector. The Salwico EV-H is designed to give an early warning for the presence of heat in the supervised area, and is available in two temperature classes: CS (fixed 84°C) and A1R (fixed 54°C + Rate-of-Rise 0.8°C/min). The Salwico EV-H is equipped with OMNIVIEW 360° LED indicator giving a clear, full 360° visibility of the red alarm indication.-
Salwico EV-H/A1R 54°C Heat Detector (040000)
The Salwico EV-H-A1R 54°C Heat Detector (040000) is an advanced analogue addressable Smoke Sensor.-
Salwico EV-H/CS 84°C Heat Detector (040005)
The Salwico EV-H/CS 84°C Heat Detector High Temp (040005) is an advanced analogue addressable Smoke Sensor.-
Salwico EV-PP TDT57 Heat Detector (040207)
The Salwico EV-PP TDT57 (040207) is an analogue addressable Heat Detector that is used in the Salwico CS300 Fire Alarm System. The EV-PP TDT57 is designed to be used in damp spaces, but it is not suitable for outdoor use or in harsh environments. In those cases, the SWM-1KL is preferable, together with an address unit. The Salwico EV-PP TDT57 has been tested according to the EN54 standards and has subsequently been approved by all major classifications.-
Salwico EV-PP TDT57 RoR Heat Detector (040209)
The Salwico EV-PP TDT57 (040209) Rate-of-Rise is an analogue addressable Heat Detector that is used in the Salwico CS300 Fire Alarm System. The EV-PP TDT57 RoR is designed to be used in damp spaces, but it is not suitable for outdoor use or in harsh environments. In those cases, the SWM-1KL is preferable, together with an address unit. The Salwico EV-PP TDT57 RoR has been tested according to the EN54 standards and has subsequently been approved by all major classifications.-
Salwico EV-PP TDT80 Heat Detector (040208)
The Salwico EV-PP TDT80 (040208) is an analogue addressable Heat Detector that is used in the Salwico CS300- fire alarm system. The Salwico EV-PP TDT80 is designed to be used in damp spaces, but it is not suitable for outdoor use or in harsh environments. In those cases, the SWM-1KL is preferable, together with an address unit. The Salwico EV-PP TDT80 has been tested according to the EN54 standards and has subsequently been approved by all major classifications.-
Salwico EV-PP TDT80 RoR Heat Detector (040210)
The Salwico EV-PP TDT80 Rate-of-Rise (040210) is an analogue addressable Heat Detector that is used in the Salwico CS300- fire alarm system. The Salwico EV-PP TDT80 is designed to be used in damp spaces, but it is not suitable for outdoor use or in harsh environments. In those cases, the SWM-1KL is preferable, together with an address unit. The Salwico EV-PP TDT80 RoR has been tested according to the EN54 standards and has subsequently been approved by all major classifications.-
Salwico HC100 A2 Conventional Heat Detector (038000)
The Salwico HC100 A2 (038000) is a Conventional Heat Detector that can be used with all Salwico Fire Alarm Systems. The HC100 A2 is a low profile Heat Detector with a smooth design, so it can be used in locations with high architectural requirements. The heat sensing element in the Salwico HC100 A2 is a thermistor type, with a short response time to changes in the ambient temperature.-
Salwico HC100 A2 IP67 Conventional Heat Detector (038005)
The Salwico HC100 A2 IP67 (038005) is a Conventional Heat Detector which can be used in all of the Salwico Fire Alarm Systems. The HC100 A2IP67 is a low profile Heat Detector with a smooth design, so it can be used in locations with high architectural requirements and harsh environments. The heat sensing element in the Salwico HC100 A2 IP67 is a thermistor type, with a short response time to changes in the ambient temperature.-
Salwico HC100-A2 IS IP67 Conventional Heat Detector (5200047-00A)
The Salwico HC100-A2 IS IP67 (5200047-00A) is an intrinsically safe Conventional Heat Detector which can be used in all fire alarm systems. The Salwico HC100-A2 IS is designed for use in areas with a high risk of explosion. The heat sensing element in the Salwico HC100-A2 IS is a thermistor type, with a short response time to changes in the ambient temperature.-
Salwico HC100 B Conventional Heat Detector (038015)
The Salwico HC100 B (038015) is a Conventional Heat Detector which can be used in all of the Salwico Fire Alarm Systems. The Salwico HC100 B is a low profile Heat Detector with a smooth design, so it can be used in locations with high architectural requirements. The heat sensing element in the Salwico HC100 B is a thermistor type, with a short response time to changes in the ambient temperature.-
Salwico HC100 D Conventional Heat Detector (038020)
The Salwico HC100 D (038020) is a Conventional Heat Detector that can be used with all Salwico Fire Alarm Systems. The HC100 D is a low profile Heat Detector with a smooth design, so it can be used in locations with high architectural requirements. The Salwico HC100 D has a thermistor type heat sensing element, with a short response time to changes in the ambient temperature.-
.
Salwico NS-AH/A1S Heat Detector (N11231)
The Salwico NS-AH/A1S (N11231) is an analogue addressable Heat Detector that is for use in addressable Fire Alarm Systems. The NS-AH/A1S has a pre-programmed static alarm level of 54°C and also gives a rate of rise pre-alarm. The low profile Heat Detector uses a high quality electronic sensing element of low thermal mass, which gives a very accurate and fast temperature reading. The temperature can be displayed on the Fire Alarm Panel. When the Salwico NS-AH/A1S is in alarm condition, a red LED on the Detector will be lit. The LED will remain lit until the alarm has been reset.-
Salwico NS-AH/CS Heat Detector (N11232)
The Salwico NS-AH/CS (N11232) is an analogue addressable Heat Detector for use in addressable Fire Alarm Systems. The NS-AH/CS has a pre-programmed static alarm level of 84°C and also gives a rate of rise pre-alarm. This low profile Heat Detector uses a high quality electronic sensing element of low thermal mass, which gives a very accurate and fast temperature reading. The temperature can be displayed on the fire alarm panel. When the Salwico NS-AH/CS is in alarm condition, a red LED on the Detector will be lit. The LED will remain lit until the alarm has been reset.-
Salwico 1128 SW-1EX explosion-proof Heat Detector
The Salwico 1128 SW-1EX is an explosion-proof, static Heat Detector, designed for potentially explosive areas. The sensor of the Salwico 1128 SW-1EX is a bimetallic thermostat that is contained in a protective aluminum housing. The sensor contacts closes at the alarm temperature, and closes when the temperature falls below the alarm limit.-
Salwico SWM-1KL 57°C Heat Detector (37170)
The Salwico SWM-1KL 57°C (37170) is a fixed temperature Heat Detector, designed for use in damp spaces. It contains a bimetallic thermostat, which closes its contacts at alarm temperature (57°C). A red LED optically indicates fire alarm on the Detector. The indication remains on until the alarm has been reset in the central unit. The Salwico SWM-1KL 57°C is also available in an intrinsically safe version: SWM-1KL/IS.-
Salwico SWM-1KL 80°C Heat Detector (37171)
The Salwico SWM-1KL 80°C (37171) is a fixed temperature Heat Detector, designed for use in damp spaces. It contains a bimetallic thermostat, which closes its contacts at alarm temperature (80°C). A red LED optically indicates fire alarm on the Detector. The indication remains on until the alarm has been reset in the central unit. The Salwico SWM-1KL 80°C is also available in an intrinsically safe version: SWM-1KL/IS.-
Salwico SWM-1KL 100°C Heat Detector (37172)
The Salwico SWM-1KL 100°C (37172) is a fixed temperature Heat Detector, designed for use in damp spaces. It contains a bimetallic thermostat, which closes its contacts at alarm temperature (100°C). A red LED optically indicates fire alarm on the Detector. The indication remains on until the alarm has been reset in the central unit. The Salwico SWM-1KL 100°C is also available in an intrinsically safe version: SWM-1KL/IS.-
Salwico SWM-1KL 140°C Heat Detector (37174)
The Salwico SWM-1KL 140°C (37174) is a fixed temperature Heat Detector, designed for use in damp spaces. It contains a bimetallic thermostat, which closes its contacts at alarm temperature (140°C). A red LED optically indicates fire alarm on the Detector. The indication remains on until the alarm has been reset in the central unit. The Salwico SWM-1KL 140°C is also available in an intrinsically safe version: SWM-1KL/IS.-
Salwico SWM-1KL-IS Heat Detector (001170)
The Salwico SWM-1KL-IS is obsolete and is replaced by the Salwico HC100A2-IS.-
Salwico SWM-1L 57°C Heat Detector (37150)
The Salwico SWM-1L 57°C (37150) is a fixed temperature Heat Detector, which is designed for use in dry spaces with the Salwico C300 Fire Alarm System. It contains a bimetallic thermostat that closes its contacts at alarm temperature (57°C). The design and function of the Salwico SWM-1L 57 permits an unlimited number of function tests. Fire alarm is optically indicated on the detector by a LED. The indication remains on until the alarm has been reset on the central unit.-
Salwico SWM-1L 80°C Heat Detector (37151)
The Salwico SWM-1L 80°C (37151) is obsolete, and can be replaced with the HC100/80 Heat Detector 80 C (38015) + UB-6 (44445).-
Salwico TDT-2 Heat Detector (047150)
The Salwico TDT-2 (047150) Heat Detector 57°C IP22 is obsolete and is replaced by the Salwico TDT57 IP22 Heat Detector (040207).-
Salwico TDT-2 Heat Detector (047151)
The Salwico TDT-2 (047151) Heat Detector 80°C IP22 is obsolete and is replaced by the Salwico TDT80 IP22 Heat Detector (040208).-
Salwico TDT-2 RoR Heat Detector (047152)
The Salwico TDT-2 (047152) Rate-of-Rise Heat Detector 57°C IP22 is obsolete and is replaced by the Salwico TDT57 RoR IP22 Heat Detector (040209).-
Salwico TDT-2 RoR Heat Detector (047153)
The Salwico TDT-2 (047153) Rate-of-Rise Heat Detector 80°C IP22 is obsolete and is replaced by the Salwico TDT80 RoR IP22 Heat Detector (040210).-
SALWICO Manual Call Points
Salwico ACP-IS Manual Call Point
The Salwico ACP-IS is a intrinsically safe addressable Manual Call Point. It is used for the Salwico Fire Alarm Systems CS3000, CS4000 and NSAC-1. Up to 20 addressable IS units can be connected to an ISOLATOR-A. Pressing the glass causes it to crack and activates the fire alarm. A test key can be used to test the device. A red LED on the Salwico ACP-IS indicates the fire alarm. When the push button is pressed the red LED will lit and it will remain lit until the alarm on the central panel is reset.-
Salwico BTA-LK Manual Call Point
The Salwico BTA-LK is a Manual Call Point designed for use in damp spaces. It can be used for connection to fire alarm sections with closing functions. A red LED will optically indicate a fire alarm. When the push button is pressed the red LED will lit up and it will remain lit until the alarm on the central panel is reset.-
Salwico CS-MCP Manual Call Point (5210030-00A)
The Salwico CS-MCP is an addressable Manual Call Point (5210030-00A) designed for installation indoors. The CS-MCP WP is activated by breaking the plastic coated glass. The Salwico CS-MCP is designed to comply with the standards for the industrial-, maritime-, offshore- and rolling stock markets up to Safety Integrity Level 2 (SIL-2). The Salwico CS-MCP has a LED on the front of the Manual Call Point that indicates activation of the fire alarm and the LED remains lit until the fire alarm has been reset.-
Salwico CS-MCP HD Manual Call Point
The Salwico CS-MCP HD is an addressable Manual Call Point. The CS-MCP HD is designed to comply with the standards for the industrial-, maritime-, offshore- and rolling stock markets up to Safety Integrity Level 2 (SIL-2). The Salwico CS-MCP HD has a heavy duty encapsulation and a high level of corrosion resistance thus making it capable of withstanding harsh environments for long periods of time. The Salwico CS-MCP HD Manual Call Point is activated by breaking the plastic coated glass. The Salwico CS-MCP HD has a LED on the front of the Manual Call Point that indicates activation of the fire alarm and the LED remains lit until the fire alarm has been reset.-
Salwico CS-MCP HD Ex Manual Call Point
The Salwico CS-MCP WP Ex is an intrinsically safe addressable Manual Call Point. The CS-MCP HD Ex is designed to comply with the standards for the industrial, maritime and offshore. The Salwico CS-MCP HD Ex has a heavy duty encapsulation and a high level of corrosion resistance thus making it capable of withstanding harsh environments for long periods of time. The Salwico CS-MCP HD Ex is activated by breaking the plastic coated glass. The CS-MCP HD Ex has a LED on the front of the Manual Call Point that indicates activation of the fire alarm and the LED remains lit until the broken glass has been replaced and the fire alarm has been reset.
-
Salwico CS-MCP WP Manual Call Point (5210031-00A)
The Salwico CS-MCP WP is an addressable Manual Call Point (5210031-00A). The CS-MCP WP has a IP67 rating which makes it suitable for harsh environments. The Salwico CS-MCP WP is activated by breaking the plastic coated glass. The Salwico CS-MCP has a LED on the front of the Manual Call Point that indicates activation of the fire alarm and the LED remains lit until the fire alarm has been reset. The Salwico CS-MCP is designed to comply with the standards for the industrial-, maritime-, offshore- and rolling stock markets up to Safety Integrity Level 2 (SIL-2).-
Salwico CS-MCP WP Ex Manual Call Point (5210034-00A)
The Salwico CS-MCP WP Ex (5210034-00A) is an intrinsically safe addressable Manual Call Point. The CS-MCP WP Ex has a IP67 rating which makes it suitable for harsh environments. The Salwico CS-MCP WP Ex Manual Call Point is activated by breaking the plastic coated glass. The Salwico CS-MCP WP Ex has a LED on the front of the call-point that indicates activation of the fire alarm and the LED remains lit until the broken glass has been replaced and the fire alarm has been reset. The Salwico CS-MCP WP Ex (5210034-00A) is designed to comply with the standards for the industrial, maritime and offshore.-
Salwico LKA-02 Manual Call Point
The Salwico LKA-02 is obsolete and is replaced by the Salwico MCP-A/IP67.-
Salwico LTK-1 Manual Call Point
The Salwico LTK-1 Manual Call Point is obsolete and is replaced by the Salwico MCP-C IP24 5200010-01A.--
Salwico MCP-A IP23 Manual Call Point (5200030-01A)
The Salwico MCP-A IP-23 (5200030-01A) is an addressable Manual Call Point for indoor environments and can be used in the Salwico CCP, CS3000, CS3004, CS4000 and NSAC-1. Pressing the glass causes it to crack, which activates the fire alarm. A protective plastic coating over the glass prevents it from injuring the operator.-
Salwico MCP-A IP67 Manual Call Point (5200031-01A)
The Salwico MCP-A IP67 (5200031-01A) is an addressable Manual Call Point, designed for use in the Salwico CCP, CS3000, CS30004, CS4000 and NSAC-1. The selected material and the encapsulation, with ingress protection IP67, makes it very suitable for use in harsh environments. Pressing the glass causes it to crack, which activates the fire alarm. A protective plastic coating over the glass prevents it from injuring the operator.-
Salwico MCP-A SCI Manual Call Point (5200030-02B)
The Salwico MCP-A SCI (5200030-02B) is an addressable Manual Call Point, used for indoor applications. The Salwico MCP-A SCI is activated by pressing the break glass. A LED on the front of the MCP-A SCI indicated the fire alarm. This LED remains lit until the fire alarm has been reset on the Fire Alarm Panel. The Salwico MCP-A SCI comes with a key to test the Manual Call Point. With a DIP-switch, the address of the MCP-A SCI is set.-
Salwico MCP-A WP SCI Manual Call Point (5200031-02B)
The Salwico MCP-A WP SCI (5200031-02B) is an addressable Manual Call Point that is used in the Salwico fire alarm systems. The Salwico MCP-A WP SCI is made out of PC/ABS, with an ingress protection IP67, making it suitable for use in harsh environments. The Salwico MCP-A WP SCI is activated by pressing the break glass. The Salwico MCP-A WP SCI comes with a key to test the Manual Call Point. With a DIP-switch, the address of the MCP-A WP SCI is set.-
.
Salwico MCP-C IP24 GB Manual Call Point (5200010-01A)
The Salwico MCP-C IP24 GB (5200010-01A) is a Manual Call Point for use in indoor environments and it is designed for use in conventional fire alarm systems. Pressing the glass causes the glass to crack which activates the MCP-C IP24 GB. A protective plastic coating on the glass prevents operator injury. The resettable elements can be ordered separately. A special key is included which can be used to test the MCP.-
Salwico MCP-C IP67 GB Manual Call Point (5200014-01A)
The Salwico MCP-C IP67 GB (5200014-01A) is a Manual Call Point for use in outdoor environments, and is designed to be used in conventional fire alarm systems. The selected material PC/ABS and the encapsulation, with ingress protection IP67, makes the Salwico MCP-C IP67 GB very suitable for harsh environments. Pressing the glass causes the glass to crack which activates the MCP-C IP67 GB. A protective plastic coating on the glass prevents operator injury. The resettable elements can be ordered separately. A special key is included which can be used to test the MCP.-
Salwico NS-ACP Manual Call Point
The Salwico NS-ACP is a Manual Call Point for addressable fire alarm systems. A red LED is lit on the Manual Call Point when the panel has received the signal. By pressing/cracking the glass the alarm will be activated. It will be lit until the glass has been removed and the alarm is reset on the Control Panel.-
Salwico NS-ACP-Exn IP55 Manual Call Point (N11321)
The Salwico NS-ACP-Exn is an addressable Manual Call Point (N11321) that can be used in the Salwico CS3000, CS4000 and the NSAC-1. The NS-ACP-Exn IP55 has an ingress protection of IP55, which makes it suitable for use in harsh environments. The Salwico NS-ACP-Exn is activated by pressing the break glass. A LED on the front of the ACP-IS indicated the fire alarm. This LED remains lit until the fire alarm has been reset on the fire alarm panel. The Salwico NS-ACP-Exn Manual Call Point comes with a key to test the Manual Call Point. With a DIP-switch, the address of the Salwico NS-ACP-Exn is set.-
Salwico NS-ACP-IP55 Manual Call Point
The Salwico NS-ACP-IP55 is a Manual Call Point for addressable fire alarm systems. The ingress protection is IP55, making this Manual Call Point suitable for very harsh environments. By pressing/cracking the glass the alarm will be activated. A red LED is lit on the Manual Call Point when the panel has received the signal. It will be lit until the glass has been removed and the alarm is reset on the Control Panel.-
Salwico NS-ACPWP Manual Call Point
The Salwico NS-ACPWP is a Manual Call Point for addressable fire alarm systems. The ingress protection is IP67, making this Manual Call Point suitable for extreme environments. By pressing/cracking the glass the alarm will be activated. A red LED is lit on the manual call point when the panel has received the signal. It will be lit until the glass has been removed and the alarm is reset on the Control Panel.-
Salwico NS-ACPWP-Exn Manual Call Point (N11320)
The Salwico NS-ACPWP-Exn is an addressable Manual Call Point (N11320) that is used in the Salwico CS3000, CS4000 and the NSAC-1 with SPK2000 fire alarm systems. The Salwico NS-ACPWP-Exn Manual Call Point is made out of PC/ABS, with an IP67 ingress protection. This makes it suitable for use in very harsh environments. The Salwico NS-ACPWP-Exn is activated by pressing the break glass. A LED on the front of the NS-ACPWP-Exn indicates the fire alarm. This LED remains lit until the fire alarm has been reset on the Fire Alarm Panel. The Salwico NS-ACPWP-Exn (N11320) comes with a key to test the Manual Call Point. With a DIP-switch, the address of the NS-ACPWP-Exn is set.-
Salwico NS-CP Manual Call Point
The Salwico NS-CP is obsolete and is replaced by the Salwico MCP-C IP24.-
Salwico NS-CP-IP55 Manual Call Point
The Salwico NS-CP-IP55 is obsolete and is replaced by the Salwico MCP-C/IP67.-
Salwico NS-CPWP Manual Call Point
The Salwico NS-CPWP is obsolete and is replaced by the Salwico MCP-C/IP67.-
Salwico NS-GA2 Manual Call Point IP22 (N1307)
The Salwico NS-GA2 is a Manual Call Point (N1307) that can be used in dry spaces. The NS-GA2 can be wall mounted or recessed mounted. For wall mounting, the NS-GA2 comes with a backbox. A plastic lid protects the Salwico NS-GA2 (N1307) from unintentional activation.-
Salwico NS-GA2/IP55 Manual Call Point (N1308)
The Salwico NS-GA2/IP55 is a Manual Call Point (N1308) that is designed to be used in harsh environments. The Salwico NS-GA2/IP55 is wall mounted. A plastic lid on the Manual Call Point protects it from unintentional activation.-
SALWICO Multi Sensors
Salwico CS-PSH Ex Multisensor (5210021-00A)
The Salwico CS-PSH Ex (5210021-00A) is an intrinsically safe addressable combined optical Smoke and Heat Detector suitable for use in SIL 1 and SIL 2 environments. This Salwico Multisensor is designed to comply with the standards for the industrial, maritime, offshore and rolling stock markets up to Safety Integrity Level 2 (SIL 2). The Salwico CS-PSH Ex is equipped with two LED indicators giving clear visibility of the red local alarm indication.-
Salwico CS-PYH Multisensor (5210020-00A)
The Salwico CS-PYH (5210020-00A) is an addressable combined optical Smoke and Heat Detector suitable for use in SIL 1 and SIL 2 environments. The Salwico CS-PYH Multisensor is designed to comply with the standards for the industrial, maritime, offshore and rolling stock markets up to Safety Integrity Level 2 (SIL 2). The Salwico CS-PYH Detector has an output for remote indication in form of a remote LED or a local Sounder.-
Salwico EC-PH/A1R Multisensor (5200176-00A)
The Salwico EC/PH-A1R is a Multisensor (5200176-00A) that belongs to the Salwico EC-range of Detectors, and is suited for dry spaces with an IP22 rating. The Salwico EC-PH/A1R uses a state of the art optical chamber and a thermal element that is combined with a microprocessor. This provides quick and accurate detection of fires. The combination of photoelectric and thermal characteristics provides a faster response to real fires, while reducing the risk of false alarms.-
Salwico EV-DPH-A2R Multisensor (40050)
The Salwico EV-DPH-A2R (40050) is an analogue addressable Multisensor, with a dual wavelenght optical chamber. The Salwico EV-DPH has two lightsource with different wavelenghts, which gives a stable reaction to different kinds of smoke. This also makes the Salwico EV-DPH-A2R insensitive to unwanted alarms from sources such as water steam. The Salwico EV-DPH-A2R comes with an Omniview 360° LED indicator, which gives a clear and full 360° visibility of the red alarm indication.-
Salwico EV-PH Optical Multisensor (040030)
The Salwico EV-PH (040030) is an analogue addressable Multisensor, designed to give an early warning for the presence of heat and smoke. Both of the heat and smoke alarms of the Salwico EV-PH can be generated individually, and offers a high protection against false alarms. The Salwico EV-PH is equipped with Omniview 360° LED indicator giving a clear, full 360° visibility of the red alarm indication. If the EV-PH is mounted with a splash base, it can be placed within harsh environments.-
Salwico NS-AOHS Optical Multisensor (N11242)
The Salwico NS-AOHS (N11242) is an analogue, addressable Optical Multisensor. The Salwico NS-AOHS can be used in the Salwico CS3000, CS4000 and NSAC-1 Fire Alarm Systems. The Salwico NS-AOHS has 2 separate analogue sensor elements, one optical for smoke detection, and 1 heat sensing element for heat detection. The alarm temperature of the Salwico NS-AOHS is 84°C. When the Detector is in alarm condition, a red LED will light up on the Detector.-
Salwico NS-AOHS-EXN Multisensor (N11255)
The Salwico NS-AOHS-EXN (N11255) is an analogue addressable dual Optical Smoke and Heat Detector for use in wet spaces (IP55). The Salwico NS-AOHS-EXN has an optical sensor element for smoke detection and a heat-sensing element for heat detection. The Salwico NS-AOHS-EXN has a red LED that will be lit in an alarm phase, until the alarm has been reset on the Control Panel.-
Salwico NS-AOHS-IS Multisensor (N11250)
The Salwico NS-AOHS-IS (N11250) is an intrinsically safe, analogue, addressable Multisensor. The Salwico NS-AOHS-IS can be used in the Salwico CS3000, CS4000 and NSAC-1 Fire Alarm Systems. The Salwico NS-AOHS-IS had 2 separate analogue sensor elements, 1 optical element for smoke detection, and 1 heat sensing element for heat detection.- -
Salwico G2000 Ambient Oil Mist Detector
The Salwico G2000 Ambient Oil Mist Detector can detect oil mist in pump rooms, engine rooms and other facilities. The Salwico G2000 is a line-of-sight opacity meter that sends a beam of light across the section that needs to be monitored. If the beam along the line-of-sight passes through oil mist, smoke or dust, the light beam is scattered and absorbed and the receiver signal is reduced.-
SALWICO Panels
Salwico C300 Conventional Fire Alarm Control Panel
The Salwico C300 Conventional Fire Alarm Control Panel is used for larger installations and can be designed to accommodate 24 zones and upwards in multiples of 8 in both wallmounted as well as console-mounted versions. It offers the possibility of connecting a full line of dependable line units of Conventional type.-
Salwico Cargo AE Fire Alarm Central
The Salwico Cargo AE is an addressable analogue Fire Alarm System.-
Salwico Cargo AI Fire Alarm Central
The Salwico Cargo AI is an addressable analogue Fire Alarm System.-
Salwico Cargo CE Fire Alarm Central
The Salwico Cargo CE is a fixed conventional Fire Alarm System.-
Salwico Cargo CI Fire Alarm Central
The Salwico Cargo CI is a conventional Fire Alarm System.-
Salwico CCP Panel
The Salwico CCP is a Fire Detection system which offers possibilities to all kinds of ships. The Salwico CCP is a user-friendly individually adapted system which ensures an extremely high safety level and it is easy and quick to install. Included in the system are the detectors in the Evolution range with an outstanding ability to suppress unwanted alarms.-
Salwico CS3000 Fire Alarm Control Panel
The Salwico CS3000 Fire Detection System is a fully adaptive analogue addressable fire detection system. This system combines reliable fire detection with verified protection against unwanted alarms. The Salwico CS3000 has been developed directly for the maritime industry in order to meet high demand within this particular industry.-
Salwico CS4000 Control Panel
The Salwico CS4000 Fire Detection System is a fully adaptive analogue addressable fire detection system. In an alarm situation the control panel can easily identify the unit emitting the alarm within seconds and it is capable of providing correct information about the exact location of the fire.
The A version of CS4000 has been developed for navy customers and can be used for submarines. The CS4000's communication method offers very reliable fire detection with protection against unwanted alarms. The interaction between Salwico CS4000 and the new Evolution Detector family ensures a truly reliable and redundant Fire Detection System.-
Salwico NSAC-1 Alarm Panel
The Salwico NSAC-1 Fire Detection System is a fully adaptive analogue addressable Fire Detection System. This Fire Detection System combines reliable fire detection with verified protection against unwanted alarms. The Salwico NSAC-1 has been developed directly for the maritime industry in order to meet high demand of this particular industry.-
Salwico Workboat CE Fire Alarm Central (5102013-02A)
The Salwico Workboat CE (5102013-02A) is a conventional Fire Alarm Central, with 8 SOLAS compliant Fire Detector sections. The Salwico Workboat CE is a suited fire detection solution for smaller vessels. The Salwico Workboat CE is managed through the Control Panel M 4.3, which can be mounted on front of the Fire Alarm Cabinet.- -
Salwico Workboat CI Fire Alarm Central (5102013-01A)
The Salwico Workboat CI (5102013-01A) is a conventional fire alarm central, with 8 SOLAS compliant Fire Detector sections. The Salwico Workboat CI is a suited fire detection solution for smaller vessels. The Salwico Workboat CI is managed through the Control Panel M 4.3, which can be mounted on front of the Fire Alarm Cabinet.-
SALWICO Smoke Detectors
Salwico DOS3 Optical Smoke Detector (N1115)
The Salwico DOS3 (N1115) is a low profile conventional Optical Smoke Detector designed to combine optimal response to smoke with a strong immunity to false and unwanted alarms. The sensor employs an alarm verification function which requires two successive pulses before an alarm is given.
The Salwico DOS3 Smoke Detector design provides strong immunity to air velocities, contamination and EMC. By means of a special protective mesh it is ensured that smoke can enter the Detector easily whilst accessibility to insects and airborne contaminants is eliminated. The Salwico DOS3 Smoke Detector can be mounted on Bases for use in both dry spaces and in difficult environments.-
Salwico EC-P IP22 Smoke Detector (5200175-00A)
The Salwico EC-P (5200175-00A) is a photoelectric conventional Smoke Detector. The Salwico EC-P IP22 uses a highly advanced optical chamber, combined with an application specific integrated circuit (ASIC). This provides quick and accurate detection of fires. The unique chamber design and other technically advanced features will significantly extend the service intervals before the Detector needs to be cleaned.-
Salwico EVC-PY-IS Intrinsically Safe Optical Smoke Detector (N1144)
The Salwico EVC-PY-IS (N1144) Intrinsically Safe Optical Smoke Detector is part of a brand new range of Fire Detectors.-
Salwico EV-DP Dual Optical Smoke Detector (040040)
The Salwico EV-DP (040040) is an analogue addressable Dual Optical Smoke Detector. The Salwico EV-DP uses two light sources with different wavelengths, which gives the Detector a stable reaction to different kinds of smoke and making it insensitive to unwanted alarms caused by water steam. The Salwico EV-DP comes with an Omniview 360° LED indicator that gives a clear full 360° visibility of the red alarm indication.-
Salwico EV-P Analogue Addressable Optical Smoke Detector (040020)
The Salwico EV-P (040020) is an Analogue Addressable Smoke Detector with an optical chamber. The Salwico EV-P is designed to give an early warning when there is a presence of smoke in the area, while offering a high protection against unwanted alarms. The Salwico EV-P is equipped with an Omniview 360° LED indicator giving a clear, full 360° visibility of the red alarm indication.-
Salwico EV-PP IA-100 Analogue Addressable Optical Smoke Detector (040202)
The Salwico EV-PP IA-100 Analogue Addressable Optical Smoke Detector (040202) is designed to give early warning for the presence of smoke in the supervised area. The Salwico EV-PP IA-100 offers a high protection against unwanted alarms. The low profile combined with the Omniview 360° alarm indication makes the Detector suitable for sites with high architectural requirements. The address is set by an 8-way DIP-switch. The Salwico EV-PP IA-100 (040202) can be used with the Salwico CS3000, CS4000, CCP and NSAC-1. The Salwico EV-PP IA100 is the replacement for the Salwico RDJ-2 (044560) and the IA100 (044750).-
Salwico EV-PP IA120 57°C Dual Ionisation Smoke/Heat Detector (040205)
The Salwico EV-PP IA120 (040205) is a addressable ionisation Multisensor, which means it can detect smoke and heat. The Salwico EV-PP IA120 has a smooth design, which makes it very suitable for locations such as offices, hotels and restaurants. If a splash proof base is used, the EV-PP IA120 can also be used in damp environments. The Salwico EV-PP IA120 (040205) is the replacement for the old Salwico IA120 (044750).-
Salwico EV-PP IA130 Analogue Addressable Optical Smoke and Heat Detector (040206)
The Salwico EV-PP IA130 Analogue Addressable Optical Smoke and Heat Detector (040206) functions are independent and can be used in any required combination. The Salwico EV-PP IA130 is designed to give early warning for the presence of heat and smoke in the supervised area. This Salwico Smoke and Heat Detector offers a high protection against unwanted alarms.
The low profile combined with the Omniview™ 360° alarm indication makes the detector suitable for sites with high architectural requirements. The address is set by an 8-way DIP-switch. The Salwico EV-PP IA130 (040206) can be used with the Salwico CS3000, CS4000 and NSAC-1. The Salwico EV-PP IA130 (040206) is the replacement for the Salwico IA130 (044753).-
Salwico EV-PP/IA130-2T/RDJ2T 57°C Optical Smoke/Heat Detector (040203)
The Salwico EV-PP/IA130-2T/RDJ2T (040203) is an addressable Optical Multisensor, which means it can detect smoke and heat. The Salwico EV-PP/IA130-2T/RDJ2T is developed as a replacement for the Salwico RDJ-2T, and can be used as a spare part for the RDJ-2T.
The Salwico EV-PP/IA130-2T/RDJ2T has a smooth design, which makes it very suitable for locations such as offices, hotels and restaurants. If a splash proof base is used, the EV-PP/IA130-2T/RDJ2T can also be used in damp environments. The Salwico EV-PP/IA130-2T/RDJ2T is self-monitoring and the central unit continuously monitors the detector and the subloop. The Salwico EV-PP/IA130-2T/RDJ2T (040203) is a replacement for the Salwico RDJ-2T (044570).-
Salwico EV-PP/OA-120 Optical Smoke Detector (040204)
The Salwico EV-PP/OA-120 (040204) is an addressable Optical Smoke Detector with an output function for use with the Salwico CS3000 Fire Alarm System. The Detector can be placed in difficult environments if it is mounted on the splash proof SPB-1 adapter with the 46950 Base plate, which provides an ingress protection of IP55.
The Salwico EV-PP/OA-120 is self-monitoring and the central unit continuously monitors Detector and subloop. The Detector is polarization independent, which simplifies the installation. The address is set by a DIP-switch. The Salwico EV-PP/OA-120 (040204) is the replacement for the Salwico OA-120 (044752).-
Salwico EV-PP/OA-130 Combined Heat/Smoke Detector (040200)
The Salwico EV-PP/OA-130 (040200) is an addressable combined optical Smoke/Heat Detector for use with the Salwico CS3000 Fire Alarm System. The design is environmentally adapted in aspects of the selection of material and design. The Detector can be placed in difficult environments if it is mounted on the splash proof SPB-1 base with the 46950 base plate, which provides an ingress protection of IP55.
The Salwico EV-PP/OA-130 is self-monitoring and the central unit continuously monitors detector and subloop. The Detector is polarization independent which simplifies the installation. The address is set by a DIP-switch. The Salwico EV-PP/OA-130 (040200) is the replacement for the Salwico IA130 (044753).-
Salwico EV-PP RDJ Ion Smoke Detector (040202)
The Salwico EV-PP RDJ (040202) is an Addressable Ionisation Smoke Detector that can be used with the Salwico CS3000 Fire Alarm System. The Salwico EV-PP RDJ has a smooth design, and is suitable for use in locations such as hotels, restaurants, hotel rooms and offices. The Salwico EV-PP RDJ is the replacement for the Salwico RDJ-2 (044560) and the IA100(044750).-
Salwico EV-PP/RDO/OA-100 Optical Smoke Detector (040201)
The Salwico EV-PP/RDO/OA-100 (040201) is an addressable Optical Smoke Detector for use with the Salwico CS3000 Fire Alarm System. The Detector can be placed in difficult environments if it is mounted on the splash proof SPB-1 adapter with the 46950 base plate, which provides an ingress protection of IP55.
The Salwico EV-PP/RDO/OA-100 (040201) is self-monitoring and continuously monitored by the central unit. The Detector is polarisation independent which simplifies the installation. The address is set by a DIP-switch. The Salwico EV-PP/RDO/OA-100 (040201) is the replacement for the Salwico OA100 (044760).-
Salwico IA100 (044750) Ion Smoke Detector
The Salwico IA100 is replaced by the Salwico EV-PP/IA100(040202).-
Salwico IA120 (044752) 57°C Dual Ionisation Smoke/Heat Detector
The Salwico IA120 (044752) is obsolate and is replaced by the Salwico EV-PP/IA120 (040205).-
Salwico IA130 (044753) 57°C Dual Ionisation Smoke/Heat Detector
The Salwico IA130 (044753) is replaced by the Salwico EV-PP/IA130 (040206).-
Salwico IA130-2T (044755) 57°C Dual Ionisation Smoke/Heat Detector
The Salwico IA130-2T (044755) is replaced by the Salwico EV-PP/IA1303T/RDJ-2T (040203).-
.
Salwico JD-1 Ion Smoke Detector
The Salwico JD-1 Ion Smoke Detector is no longer in production and replaced by the DOS3 including Base UB-1.-
Salwico JD-5 Ion Smoke Detector
The Salwico JD-5 Ion Smoke Detector is no longer in production and is replaced by the DOS3.-
Salwico NID-38 Ion Smoke Detector
This Smoke Detector is no longer in production and is replaced by the DOS3 Optical Smoke Detector with SPB-1 adapter and base plate 46950.-
Salwico NID-38FB Ion Smoke Detector
This Smoke Detector is no longer in production and replaced by the DOS3 Optical Smoke Detector with SPB-1 adapter and base plate 46950.-
Salwico NID-58 Ion Smoke Detector
This Smoke Detector is no longer in production and replaced by the DOS3 Optical Smoke Detector with SPB-1 adapter and base plate 46950.-
Salwico NS-AIS N11101 Ion Smoke Detector
This Smoke Detector is no longer in production and replaced by the NS-AOS.-
Salwico NS-AOS Optical Smoke Detector (N11111)
The Salwico NS-AOS (N11111) is an analogue addressable Optical Smoke Detector for Salwico addressable fire alarm systems. The address is set with a DIP-switch mounted on the back of the Detector. When the Detector is in alarm condition, a red LED on the Detector will be lit. The LED is lit until the alarm has been reset at the control panel. The Detector is polarity independent. An external LED indicator, buzzer and so on can be connected to the remote output.-
Salwico NS-AOS-IS Intrinsically Safe Optical Smoke Detector (N1148)
The Salwico NS-AOS-IS is an Intrinsically Safe Optical Smoke Detector (N1148). The Salwico NS-AOS-IS is designed for use with the CS3000, CS4000 and NSAC-1 Fire Alarm Systems. The Salwico NS-AOS-IS comes with a red LED, that will indicate an alarm condition. The Salwico NS-AOS-IS is connected to the Detector loop via the Salwico ISOLATOR-A (N1790). Up to 20 addressable IS Detectors can be connected to one ISOLATOR-A.-
Salwico OA-100 (044760) Optical Smoke Detector
The Salwico OA-100 (044760) is replaced by the Salwico EV-PP/RDO/OA100 (040201).-
Salwico OA-120 (044762) Optical Smoke Detector
The Salwico OA-120 (044762) is replaced by the Salwico EV-PP/OA-120 (040204).-
Salwico OA-130 (044763) Combined Heat/Smoke Detector
The Salwico IA130 (044763) is replaced by the Salwico EV-PP/IA130 (040200).-
Salwico RDJ-2 (044560) Ionisation Smoke Detector
The Salwico RDJ-2 (044560) Ionisation Smoke Detector is obsolete and is replaced by the Salwico EV-PP/RDJ (040202) Ionisation Smoke Detector.-
Salwico RDJ2T Smoke & Heat Detector (040203)
The Salwico EV-PP/IA1302T/RDJ2T (040203) is an analogue addressable Optical Smoke and Heat Detector. This Smoke and Heat Detector functions are independent and can be used in any required combination.
This Salwico Smoke & Heat Detector is designed to provide an early warning for the presence of heat and smoke in the supervised area. The Salwico EV-PP/ IA1302T/ RDJ2T (040203) offers a high protection against unwanted alarms. The low profile combined with the Omniview™ 360° alarm indication makes the detector suitable for sites with high architectural requirements. The address is set by an 8-way DIP-switch.-
Salwico RDJ-2T 57°C Dual Optical Smoke/Heat Detector (044570)
The Salwico RDJ-2T (044570) Dual Optical Smoke/Heat Detector 57°C is obsolete and is replaced by the Salwico EV-PP/IA130-2T/RDJ2T (040203) Dual Optical Smoke/Heat Detector 57°C.-
Salwico RDO-2 Optical Smoke Detector (044580)
The Salwico RDO-2 (044580) Optical Smoke Detector is obsolete and is replaced by the Salwico EV-PP/RDO/OA100 (040201) Optical Smoke Detector.-
Salwico ST-I-IS Intrinsically Safe Ionization Smoke Detector
The Salwico ST-I-IS is obsolete and is replaced by the Salwico EVC-PY-IS.-
SALWICO Bases
Salwico 2IP55 Detector Base (046950)
The Salwico 2IP55 (046950) is a Detector Base that is suitable for all the Salwico IP55 Adapters. The Salwico 2IP55 Detector Base makes it possible to install Smoke, Heat and Flame Detectors in harsh environments with an ingress protection up to IP55. The Salwico 2IP55 can be used in addressable and conventional Fire Alarm Systems.-
Salwico AC-IR-3Fq Conventional Base (5200235-00A)
The Salwico AC-IR-3Fq (5200235-00A) is a Conventional Base, designed to install the Salwico AC-IR-3Fq Flame Detector in harsh environments. When lock screws are used, the Base plate provides an IP67 rating. The Base provides a termination possibility for Detectors that are set in Conventional Mode.-
Salwico AC-IR-3Fq Addressable Base (5200237-00A)
The Salwico AC-IR-3Fq (5200237-00A) is an Addressable Base, designed to install the Salwico AC-IR-3Fq Flame Detector in harsh environments. When lock screws are used, the Base plate provides an IP67 rating. This Salwico Base provides a termination possibility for Detectors that are set in addressable mode. The address is set by an 8-way DIP-switch.-
Salwico EC-ADAPT Adapter for wet spaces (5200178-00A)
The Salwico EC-ADAPT (5200178-00A) is a connection Adapter with an integrated 470 Ohm serial resistor for the installation of Salwico EC-type Detectors on the Salwico 2IP55 Detector Base (046950). The Salwico EC-ADAPT is used to connect EC-Type Detectors to a conventional fire alarm system, in an IP55 environment.-
Salwico EC-BASE Detector Base for dry spaces (5200177-00A)
The Salwico EC-BASE (5200177-00A) is a low profile Base plate for the Salwico EC range of Smoke and Heat Detectors. The Salwico EC-BASE is equipped with an integrated 470 Ohm serial resistor to install EC-type Detectors. The Salwico EC-Base is designed for use in dry and clean spaces.-
Salwico EV-SPB-BI Base Adapter with Short Circuit Isolator (5200098-00A)
The Salwico EV-SPB-BI (5200098-00A) is a Base Adapter with a short circuit isolator for watertight Bases. The Salwico EV-SPB-BI is used as an interface for conventional and analogue addressable fire Detectors. When a conventional Detector is fitted on the Salwico EV-SPB-BI, the address of the isolator will be displayed by the system upon a fire alarm.-
Salwico IS-SPB-BASE (5201044-00A)
The Salwico IS-SPB-BASE (5201044-00A) is an Adapter Base for the Salwico 2IP55 Detector Base (046950). The Salwico IS-SPB-ADAPT can only be used with the Salwico HC-100 A2-IS (038010).-
.
Salwico NS-ADAPT-3 IP55 Base Plate Adapter (N1425)
The Salwico NS-ADAPT-3 (N1425) is a connection Adapter with an integrated 330 OHm serial resistor to mount on the Salwico 2IP55 Detector Base (046950). The Salwico NS-ADAPT-3 is used to connect NS-type Detectors to the conventional Salwico Fire Alarm System, ServoMaster and ServoFighter in an IP55 environment.-
Salwico NS ADAPT-IS IP55 IS Adapter (N1422)
The Salwico NS-ADAPT-IS (N1422) is an Intrinsically Safe Adapter for the Salwico 2IP55 Detector Base (046950). The NS-ADAPT-IS can be used in both the Salwico Addressable and Conventional Fire Alarm Systems.-
Salwico NS-ADAPT-IS2 Adapter (N1430)
The Salwico NS-ADAPT-IS2 (N1430) is an Adapter for the Salwico IP55 Detector Bases and can only be used with the Salwico NS-AOHS-IS (N11250) Multisensor. The Salwico NS-ADAPT-IS2 can be used with the Salwico CS3000, CS4000 and NSAC-1 Addressable Fire Alarm Systems.-
Salwico NS-BNCL Detector Base (N1402)
The Salwico NS-BNCL (N1402) Detector Base is replaced by the Salwico UB-6 044445.-
Salwico SPB-ADAPT Base Adapter (046916)
The Salwico SPB-ADAPT (046916) is a Base Adapter for the Salwico 2IP55 (46950) Base. The Salwico SPB-ADAPT is made to replace the Salwico SPB-1 (46915) and NS-ADAPT (N1421) Adapters. The SPB-ADAPT can be used with Salwico Smoke, Heat and Flame Detectors and can be used or all Salwico Fire Alarm systems.-
Salwico UB-1 Detector Base (46911)
The Salwico UB-1 (46911) Detector Base is designed to be used with the Detectors of the Salwico Fire Alarm System.-
Salwico UB-6 Detector Base (044445)
The Salwico UB-6 (044445) is a low profile base plate for Consilium Smoke, Heat and Flame Detectors. The Salwico UB-6 is designed for use in dry and clean spaces, and can be used with addressable and conventional Fire Alarm Systems.-